SD2-100-RR
DWG inside ZIP · 455 KB
In the archive: Power Products/Non-fused Disconnects/SD2-100-RR.dwg
Download the full archive, then extract this named drawing.
AutomationDirect
SD2-100-RR disconnecting switch CAD drawings & downloads
CAD drawings for SD2-100-RR help place the selected disconnecting switch and coordinate its mounting, connection access and service space. A disconnecting switch provides the switching or isolation function stated for the selected product. The switch body, handle and connecting operating parts may need separate drawings.
DWG · 1 listed file · Source checked 2026-10-13
Source-only
These files are supplied by the manufacturer. Use the official source, or ask our team to obtain the drawings for your selected equipment.
Download files
Official source routesNeed another model or format?
Equipment and file summary
- Equipment / resource
- SD2-100-RR disconnecting switch
- Manufacturer
- AutomationDirect
- Resource type
- Named drawing reference
- Listed file formats
- DWG
- Listed files
- 1
- Available previews
- Manufacturer source / drawing request
- Recorded revisions
- Confirm the revision with the manufacturer
- Source checked
- 2026-10-13
- Download access
- Use the official manufacturer source or request the exact drawing
Model image preview
This source-only entry has no drawing preview hosted here. Use the manufacturer source or request the drawing with your email.
Explore the model in 3D
Choose the model or configuration at the manufacturer, or request a 3D file here.
Which file should I choose?
The verified native member is Power Products/Non-fused Disconnects/SD2-100-RR.dwg. Its identity was checked against the acquired manufacturer archive. Place the disconnect and its operating hardware together so door alignment, travel and terminal access can be reviewed. The drawing is a mechanical coordination reference, not a circuit design or certification record.
What is included?
This page identifies SD2-100-RR.dwg in AutomationDirect's Non-Fused Disconnects collection.
The ZIP remains complete. Other members are part of the same manufacturer package, rather than separate downloads for this page.
The listed drawing files are provided as supplied. No 3D model is inferred from these drawings.
Before using it
- Confirm that the project schedule calls for SD2-100-RR or an explicitly documented associated drawing identity.
- Place the disconnect and its operating hardware together so door alignment, travel and terminal access can be reviewed.
- Check the units and drawing revision before measuring or inserting geometry into a project.
- Coordinate the mounting and connection faces with adjacent equipment, enclosure access and the cable route.
- Verify ratings, compatible accessories and installation clearances using the manufacturer documentation for the exact device.
In plain English
What the equipment does
A disconnector separates equipment from its supply under its specified conditions. Whether it can also interrupt load current depends on the device's switching rating.
A simple example
In a switchyard, a disconnector provides an isolation point for a circuit section within the site's operating procedure.
Questions about this resource
What does the SD2-100-RR reference verify?
It verifies the acquired native drawing identity and its place in the official non-fused disconnect hardware source collection. The source member and checksums identify the reviewed file; they do not establish the selected device rating or current revision.
How should I use the original file?
Download the unchanged manufacturer archive from the official route and locate Power Products/Non-fused Disconnects/SD2-100-RR.dwg. Check the drawing units and revision before using its geometry in the project.
Can grouped drawing identities replace one another electrically?
No. Mechanical drawing grouping only avoids separate pages for matching geometry, views or voltage aliases. Confirm exact electrical function, connection arrangement and manufacturer compatibility separately.
Equipment references and drawing guides
Matching GA product reference
Related GA equipment
Electrical drawing guides →Sources & versions
Original publisher: AutomationDirect. Source checked 2026-10-13. Acquired originals retain their publisher filenames.
- SD2-100-RR
nonfused_disconnects.zip ↗ · Acquired 2026-10-13
- Manufacturer
- AutomationDirect
- Resource
- Named drawing reference
- Formats
- DWG
- Regional source coverage
- US / Global
US and Canada supplier catalogue; globally discoverable. Regional suitability must be verified for exact part.
Verified native files
- Power Products/Non-fused Disconnects/SD2-100-RR.dwg · DWG · 299 KB
SHA-256: 035a488aa39559a83e3114d666c9a192d360b8f6b41618b5da6790bc68775521
Full Non-Fused Disconnects source collection →
More switchboards & switchgear · More AutomationDirect drawings · Request other equipment