55
Power factor protection
Supervises power factor according to the selected relay's electrical measurement method.
Protection functions
Protection functions · 55D
Displacement power-factor supervision
Supervises displacement power factor as defined by the relay's fundamental-frequency measurements.
SLD / Schematic · 55D
What it represents
Supervises displacement power factor as defined by the relay's fundamental-frequency measurements.
The drafting record should connect this function to the current and voltage inputs and displacement-angle reference, then trace the displacement power-factor output or control interface. Keep the complete designation and equipment tag together so that the SLD, relay logic and terminal schedule describe the same implementation.
The cited mapping is a public manufacturer example (Eaton E-Series function mapping). Suffixes are not universal equivalences across products, and this reference supplies neither a protection setting nor certification of the selected scheme.
How to read it
- Identify the current and voltage inputs and displacement-angle reference.
- Trace the displacement power-factor output or control interface.
Information to show or reference
- Label the current and voltage inputs and displacement-angle reference.
- Cross-reference the displacement power-factor output or control interface.
- Retain the complete suffix, selected device tag and manufacturer manual revision.
A distinction that matters
55D is not interchangeable with the apparent power-factor element 55A when the waveform contains harmonics.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
E-Series protective relays: public family comparison brochure
Public primary-source function or application mapping used to identify this designation; wording and drafting notes are original.
IEEE C37.2-2022: power-system device function numbers
Device-number and suffix convention. This page is not a reproduction of the full licensed standard.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. DXF uses unscaled drawing units; a GA envelope supplies no product dimensions, clearances or fabrication information. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.