NO EARLY
Early-make normally-open contact
An early-make NO contact closes earlier in the mechanism sequence than specified associated contacts.
Schematic
IEEE / ANSI · NO EARLY
ANSI/IEEE early-make normally-open contact symbol
IEEE-oriented graphical reference for early-make normally-open contact, with public vendor evidence and drawing-reading notes.
IEEE / ANSI · Autodesk IEEE-oriented Relays and Contacts functional form
Autodesk explicitly publishes this block under IEEE Symbol Preview. The counterpart is the matching functional concept; no equivalence of every detailed standard graphic is asserted.
Shown as an independently authored educational illustration. Use the cited publication and drawing legend to verify the required drafting form.
Schematic · NO EARLY
What it represents
The anticipated NO contact form identifies earlier operation relative to documented associated contacts. The common device reference supplies that comparison; the modifier does not assign a universal millisecond operating time.
This is a convention-specific lookup based on the publisher's IEEE-labelled preview. The geometry here is independently drawn to explain the connection or operation; it is not a certified reproduction of the standard graphic.
How to read it
- Compare the linked contacts of the same mechanism.
- Read the selected library and the project legend together. A vendor block identifier is meaningful within its named library and is not a universal standard-symbol code.
Information to show or reference
- Name common device
- Identify sequence reference contacts
- State early-closing action
A distinction that matters
Relative mechanical sequence differs from an electronic on-delay setting.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
Autodesk IEEE Symbol Preview — Relays and Contacts
Exact public IEEE-oriented category page verifying the component name and vendor block identifier.
IEEE/ANSI 315-1975: graphic symbols for electrical and electronics diagrams
Graphic-symbol standards context and official status; not a source of reproduced artwork.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. DXF uses unscaled drawing units; a GA envelope supplies no product dimensions, clearances or fabrication information. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.