NC
Normally closed contact
A contact shown closed in the normal state defined for its device.
Schematic
IEEE / ANSI · NC
ANSI/IEEE normally closed contact symbol
IEEE-oriented graphical reference for normally closed contact, with public vendor evidence and drawing-reading notes.
IEEE / ANSI · Autodesk IEEE-oriented Relays and Contacts functional form
Autodesk explicitly publishes this block under IEEE Symbol Preview. The counterpart is the matching functional concept; no equivalence of every detailed standard graphic is asserted.
Shown as an independently authored educational illustration. Use the cited publication and drawing legend to verify the required drafting form.
Schematic · NC
What it represents
The normally-closed relay contact form identifies a conducting path in its documented unoperated condition. The operating action changes that path; it does not tell the reader whether the controlled equipment is normally running or stopped.
This is a convention-specific lookup based on the publisher's IEEE-labelled preview. The geometry here is independently drawn to explain the connection or operation; it is not a certified reproduction of the standard graphic.
How to read it
- Evaluate the controlled circuit in both reference and operated states.
- Read the selected library and the project legend together. A vendor block identifier is meaningful within its named library and is not a universal standard-symbol code.
Information to show or reference
- State reference condition
- Identify contact terminals
- Link operating device
A distinction that matters
A closed reference contact and a closed circuit breaker describe different devices and circuit duties.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
Autodesk IEEE Symbol Preview — Relays and Contacts
Exact public IEEE-oriented category page verifying the component name and vendor block identifier.
IEEE/ANSI 315-1975: graphic symbols for electrical and electronics diagrams
Graphic-symbol standards context and official status; not a source of reproduced artwork.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. DXF uses unscaled drawing units; a GA envelope supplies no product dimensions, clearances or fabrication information. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
NO
Normally open contact
A contact shown open in the normal state defined for its device.
Schematic
CO
Changeover contact
A contact arrangement switching a common connection between two contact paths.
Schematic
Coil
Relay coil
The operating element associated with a relay and its separately drawn contacts.
Schematic
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.