TOFF NO
Off-delay normally-open contact
An off-delay NO contact retains the documented operated state for an interval after the timer trigger is removed.
Schematic
IEEE / ANSI · TOFF NO
ANSI/IEEE off-delay normally-open contact symbol
IEEE-oriented graphical reference for off-delay normally-open contact, with public vendor evidence and drawing-reading notes.
IEEE / ANSI · Autodesk IEEE-oriented Time Delay Relays functional form
Autodesk explicitly publishes this block under IEEE Symbol Preview. The counterpart is the matching functional concept; no equivalence of every detailed standard graphic is asserted.
Shown as an independently authored educational illustration. Use the cited publication and drawing legend to verify the required drafting form.
Schematic · TOFF NO
What it represents
The off-delay NO contact form identifies instant closing on the documented operation and delayed opening on release. This sequence is distinct from merely marking a contact as normally open, and auxiliary-supply behaviour must be checked separately.
This is a convention-specific lookup based on the publisher's IEEE-labelled preview. The geometry here is independently drawn to explain the connection or operation; it is not a certified reproduction of the standard graphic.
How to read it
- Read instant close and delayed release as two distinct transitions.
- Read the selected library and the project legend together. A vendor block identifier is meaningful within its named library and is not a universal standard-symbol code.
Information to show or reference
- Link trigger/timer
- State release interval
- Reference supply-loss behaviour
A distinction that matters
Off-delay NO output is not equivalent to an on-delay NC output under every operating sequence.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
Autodesk IEEE Symbol Preview — Time Delay Relays
Exact public IEEE-oriented category page verifying the component name and vendor block identifier.
IEEE/ANSI 315-1975: graphic symbols for electrical and electronics diagrams
Graphic-symbol standards context and official status; not a source of reproduced artwork.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. DXF uses unscaled drawing units; a GA envelope supplies no product dimensions, clearances or fabrication information. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.