POT
Potentiometer
A potentiometer uses a movable contact on a resistive element to provide a documented adjustable divider or resistance.
SLD / Schematic
IEEE / ANSI · POT
ANSI/IEEE potentiometer symbol
IEEE-oriented graphical reference for potentiometer, with public vendor evidence and drawing-reading notes.
IEEE / ANSI · Autodesk IEEE-oriented Resistive Components functional form
Autodesk explicitly publishes this block under IEEE Symbol Preview. The counterpart is the matching functional concept; no equivalence of every detailed standard graphic is asserted.
Shown as an independently authored educational illustration. Use the cited publication and drawing legend to verify the required drafting form.
SLD / Schematic · POT
What it represents
The mobile-contact resistor form identifies a wiper associated with a resistive element. Its two end terminals and movable contact define the circuit connection, making the wiper path important when reading setpoint or feedback wiring.
This is a convention-specific lookup based on the publisher's IEEE-labelled preview. The geometry here is independently drawn to explain the connection or operation; it is not a certified reproduction of the standard graphic.
How to read it
- Trace the wiper independently from the fixed ends.
- Read the selected library and the project legend together. A vendor block identifier is meaningful within its named library and is not a universal standard-symbol code.
Information to show or reference
- Label wiper and end terminals
- State resistance range
- Reference operating/setpoint connection
A distinction that matters
A three-terminal divider connection and a two-terminal variable-resistance connection use the component differently.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
Autodesk IEEE Symbol Preview — Resistive Components
Exact public IEEE-oriented category page verifying the component name and vendor block identifier.
IEEE/ANSI 315-1975: graphic symbols for electrical and electronics diagrams
Graphic-symbol standards context and official status; not a source of reproduced artwork.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. DXF uses unscaled drawing units; a GA envelope supplies no product dimensions, clearances or fabrication information. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.