SEL 3 HOLD
Three-position maintained selector
A three-position maintained selector stays at the selected position until manually moved.
Schematic
IEEE / ANSI · SEL 3 HOLD
ANSI/IEEE three-position maintained selector symbol
IEEE-oriented graphical reference for three-position maintained selector, with public vendor evidence and drawing-reading notes.
IEEE / ANSI · Autodesk IEEE-oriented 3 Position Selector Switches functional form
Autodesk explicitly publishes this block under IEEE Symbol Preview. The counterpart is the matching functional concept; no equivalence of every detailed standard graphic is asserted.
Shown as an independently authored educational illustration. Use the cited publication and drawing legend to verify the required drafting form.
Schematic · SEL 3 HOLD
What it represents
The three-position maintained selector form provides three stable choices in the named library. Each associated contact is interpreted through the complete position table, with a shared tag tying the operator and contact blocks together.
This is a convention-specific lookup based on the publisher's IEEE-labelled preview. The geometry here is independently drawn to explain the connection or operation; it is not a certified reproduction of the standard graphic.
How to read it
- Check all three positions rather than treating the middle as an assumed off state.
- Read the selected library and the project legend together. A vendor block identifier is meaningful within its named library and is not a universal standard-symbol code.
Information to show or reference
- Label positions
- State every contact condition
- Link common operator
A distinction that matters
A stable centre position and a spring-return centre position describe different mechanisms.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
Autodesk IEEE Symbol Preview — 3 Position Selector Switches
Exact public IEEE-oriented category page verifying the component name and vendor block identifier.
IEEE/ANSI 315-1975: graphic symbols for electrical and electronics diagrams
Graphic-symbol standards context and official status; not a source of reproduced artwork.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. DXF uses unscaled drawing units; a GA envelope supplies no product dimensions, clearances or fabrication information. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.