CB
Circuit breaker
A switching device that can interrupt a circuit, with specified fault-interruption capability.
SLD / Schematic
Functional block · BDSD
Breaker double-point status decoding
Functional block · Switchgear
An independently authored application reference. The drawing shows the named function or circuit relationship; use the project legend and selected equipment documentation for its drafting form and connections.
Browse this installation focusIn plain English
What this block does
Interprets the two independent auxiliary indications as open, closed or an invalid combination.
A simple example
In a switchgear control schematic, the bay controller compares independent status contacts before displaying a position or allowing another operation. The signal labels explain which physical state each contact represents. For this reference, the drawing identifies “52a and 52b states” at the input and “Decoded breaker position” at the output. Disagreement must remain distinguishable from transition.
What the drawings help you do
Start at the named input: 52a and 52b states. Identify its source device or document and the state represented on the drawing. Follow the named output: Decoded breaker position. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Input
- 52a and 52b states
- Output
- Decoded breaker position
- Application reference
- An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.
Read the source: Masterclad medium-voltage switchgear: circuit-breaker section interlocks
Schematic · BDSD
What it represents
Interprets the two independent auxiliary indications as open, closed or an invalid combination. Breaker status indications describe the operating mechanism, the removable truck or the health of a supporting system. These signals are related but are not interchangeable: an open breaker can still have its truck connected to live bus contacts.
In a switchgear control schematic, the bay controller compares independent status contacts before displaying a position or allowing another operation. The signal labels explain which physical state each contact represents. For this reference, the drawing identifies “52a and 52b states” at the input and “Decoded breaker position” at the output. Disagreement must remain distinguishable from transition.
Keep contact reference conditions, terminal numbers and interpretation logic together. Distinguish a mechanically operated indication from a measured current or voltage condition. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.
How to read it
- Start at the named input: 52a and 52b states. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Decoded breaker position. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Disagreement must remain distinguishable from transition.
- Keep contact reference conditions, terminal numbers and interpretation logic together. Distinguish a mechanically operated indication from a measured current or voltage condition.
Information to show or reference
- Label the source and connection reference for 52a and 52b states.
- Identify the destination and defined state of decoded breaker position.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: Disagreement must remain distinguishable from transition.
A distinction that matters
Disagreement must remain distinguishable from transition. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
Masterclad medium-voltage switchgear: circuit-breaker section interlocks
Public technical context for breaker position and status interfaces. Breaker control, mechanism, position contacts, racking interlocks and test interfaces. The application text and educational graphic are independently authored; the publisher does not certify this representation.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.