Breaker-failure current-check gate

What it represents

Uses the assigned current measurement to assess continued conduction after a breaker-failure initiation. A protection scheme combines measurements, decision elements and communication or trip outputs to protect a defined part of the network. A function number names a job; the scheme interface shows how that job connects to other equipment.

In a substation feeder bay, local current and voltage measurements may combine with a remote-end signal before the protection issues the assigned trip request. Backup actions use their own defined initiations and supervision. For this reference, the drawing identifies “Post-trip current condition” at the input and “Breaker-failure current check” at the output. The selected current criterion is application-specific.

Keep each protected zone, initiating quantity, blocking signal and trip destination distinct. Settings, communication performance and coordination require the approved protection study and selected relay documentation. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.

How to read it

• Start at the named input: Post-trip current condition. Identify its source device or document and the state represented on the drawing.
• Follow the named output: Breaker-failure current check. Cross-reference its destination and separate the command from confirmation that the equipment responded.
• The selected current criterion is application-specific.
• Keep each protected zone, initiating quantity, blocking signal and trip destination distinct. Settings, communication performance and coordination require the approved protection study and selected relay documentation.

Information to show or reference

• Label the source and connection reference for post-trip current condition.
• Identify the destination and defined state of breaker-failure current check.
• Record the equipment or control-document revision supporting this functional block.
• Check this application limit in the project design: The selected current criterion is application-specific.

Sources you can follow

These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.

About this graphic

This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.

SVG and DXF downloads contain this original artwork. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.