GA
Switchroom exhaust fan
An exhaust fan removes air along the documented room ventilation route.
General arrangement objects
Functional block · ECR
Enclosure condensation-control request
Functional block · Switchrooms
An independently authored application reference. The drawing shows the named function or circuit relationship; use the project legend and selected equipment documentation for its drafting form and connections.
Browse this installation focusIn plain English
What this block does
Initiates the documented heater or conditioning action for condensation management.
A simple example
In a switchroom containing transformers and auxiliary panels, the room controller can supervise fan availability and send an alarm when the documented ventilation duty is not achieved. For this reference, the drawing identifies “Humidity and temperature condition” at the input and “Conditioning request” at the output. Heating and ventilation need coordinated design.
What the drawings help you do
Start at the named input: Humidity and temperature condition. Identify its source device or document and the state represented on the drawing. Follow the named output: Conditioning request. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Input
- Humidity and temperature condition
- Output
- Conditioning request
- Application reference
- An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.
Read the source: Ventilation in MV substations
Schematic · ECR
What it represents
Initiates the documented heater or conditioning action for condensation management. Ventilation control coordinates the equipment that manages heat and air movement in an electrical room. A temperature request, a fan command and proof of airflow are separate signals, and the room design determines how they interact.
In a switchroom containing transformers and auxiliary panels, the room controller can supervise fan availability and send an alarm when the documented ventilation duty is not achieved. For this reference, the drawing identifies “Humidity and temperature condition” at the input and “Conditioning request” at the output. Heating and ventilation need coordinated design.
Identify the monitored space, the selected ventilation mode and the equipment feedback. Avoid inferring airflow, temperature limits or a fire response from a generic fan symbol; these require the room-services design. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.
How to read it
- Start at the named input: Humidity and temperature condition. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Conditioning request. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Heating and ventilation need coordinated design.
- Identify the monitored space, the selected ventilation mode and the equipment feedback. Avoid inferring airflow, temperature limits or a fire response from a generic fan symbol; these require the room-services design.
Information to show or reference
- Label the source and connection reference for humidity and temperature condition.
- Identify the destination and defined state of conditioning request.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: Heating and ventilation need coordinated design.
A distinction that matters
Heating and ventilation need coordinated design. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
Ventilation in MV substations
Public technical context for switchroom ventilation interfaces. Heat removal, condensation and environmental design context. The application text and educational graphic are independently authored; the publisher does not certify this representation.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.