BUS-TR
Logic bus transceiver
Drives data between two digital buses according to the selected direction and enable conditions.
Schematic
Symbols · LVDS TX
LVDS line driver
In plain English
What does LVDS line driver mean?
An LVDS driver converts a logic signal into the selected low-voltage differential output.
A simple example
A board can send data over an appropriately designed differential connection to a matching receiver.
What the drawings help you do
Show the logic input and the two differential output conductors. A driver creates the signal that a compatible receiver interprets; the differential pair is not a power supply or an unspecified pair of ordinary digital outputs. Identify the selected link and termination requirements.
- LVDS
- Low-voltage differential signalling.
- Termination
- The selected circuit arrangement used to control the behaviour of the transmission connection.
Before using this reference
- Identify the driver input and differential pair labels.
- Reference the supported receiver and termination.
- Show the selected supply and signal-return arrangement.
Why show the two output conductors together?
The receiver interprets their voltage difference as part of the selected differential interface. Their routing and termination must follow the actual device and link design.
Read the source: Low-voltage differential signalling
Schematic · LVDS TX
A distinction that matters
A differential signal pair needs its specified termination and routing; two wires alone do not define a valid interface.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
Low-voltage differential signalling
Low-voltage differential signalling: public technical context for the named function. Product and compliance details remain with the publisher.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. DXF uses unscaled drawing units; a GA envelope supplies no product dimensions, clearances or fabrication information. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
LVDS RX
LVDS line receiver
An LVDS receiver converts a compatible differential input into its specified logic output.
Schematic
PCS
Power converter / inverter
An identified interface converting electrical power between documented circuit forms.
SLD / Schematic
Terminal
Terminal connection
An identified electrical connection point linking schematic and wiring information.
Schematic
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.