Bus
Busbar
A common conductive connection distributing power to connected circuits.
SLD / Schematic
Circuit arrangement · SSA
Sectionalised single-bus arrangement
Circuit arrangement · Switchyards
An independently authored application reference. The drawing shows the named function or circuit relationship; use the project legend and selected equipment documentation for its drafting form and connections.
Browse this installation focusIn plain English
What this arrangement shows
Divides a common bus into identified sections with a defined section connection.
A simple example
In a switchyard, a single-line arrangement helps identify the bay connections, tie devices and possible alternate supply paths. Normal open points must remain separate from the equipment's physical ability to close. For this reference, the drawing identifies “Incoming and outgoing bays” at the input and “Sectioned bus network” at the output. Section independence depends on the switching arrangement.
What the drawings help you do
Start at the named input: Incoming and outgoing bays. Identify its source device or document and the state represented on the drawing. Follow the named output: Sectioned bus network. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Input
- Incoming and outgoing bays
- Output
- Sectioned bus network
- Application reference
- An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.
Read the source: SEL-451 protection, automation and bay control
SLD / Schematic · SSA
What it represents
Divides a common bus into identified sections with a defined section connection. A busbar arrangement defines the available paths between incoming circuits, outgoing circuits and bus sections. Its switching devices and measurement boundaries determine how a circuit can remain connected when part of the installation is unavailable.
In a switchyard, a single-line arrangement helps identify the bay connections, tie devices and possible alternate supply paths. Normal open points must remain separate from the equipment's physical ability to close. For this reference, the drawing identifies “Incoming and outgoing bays” at the input and “Sectioned bus network” at the output. Section independence depends on the switching arrangement.
Name each bus, bay and switching device. The arrangement illustrates electrical connectivity; reliability, fault levels, permitted switching and protection coordination require the actual network design. The circuit arrangement is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.
How to read it
- Start at the named input: Incoming and outgoing bays. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Sectioned bus network. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Section independence depends on the switching arrangement.
- Name each bus, bay and switching device. The arrangement illustrates electrical connectivity; reliability, fault levels, permitted switching and protection coordination require the actual network design.
Information to show or reference
- Label the source and connection reference for incoming and outgoing bays.
- Identify the destination and defined state of sectioned bus network.
- Record the equipment or control-document revision supporting this circuit arrangement.
- Check this application limit in the project design: Section independence depends on the switching arrangement.
A distinction that matters
Section independence depends on the switching arrangement. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
SEL-451 protection, automation and bay control
Public technical context for switchyard busbar arrangements. Bus arrangements, breaker control and bay-level coordination. The application text and educational graphic are independently authored; the publisher does not certify this representation.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.