EM-M
Maintained emergency luminaire plan mark
Plan mark for an emergency luminaire whose lamp is lit at all times and stays lit on supply failure.
IEC
Functional block · SETI
Self-contained emergency-lighting test interface
Functional block · Switchrooms
An independently authored application reference. The drawing shows the named function or circuit relationship; use the project legend and selected equipment documentation for its drafting form and connections.
Browse this installation focusIn plain English
What this block does
Shows the control interface used by the selected self-contained lighting test system.
A simple example
In a switchroom, a normal lighting branch may be switched locally while the specified emergency luminaires remain connected to their own backed-up or integral supply. For this reference, the drawing identifies “Lighting test request” at the input and “Assigned luminaire test input” at the output. Testing method follows the luminaire system documentation.
What the drawings help you do
Start at the named input: Lighting test request. Identify its source device or document and the state represented on the drawing. Follow the named output: Assigned luminaire test input. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Input
- Lighting test request
- Output
- Assigned luminaire test input
- Application reference
- An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.
Read the source: Indoor substation: lighting, fire and auxiliary services
Schematic · SETI
What it represents
Shows the control interface used by the selected self-contained lighting test system. Lighting and access interfaces coordinate the electrical-room service circuits and their supervision. Normal lighting, emergency illumination and access indication have different power sources and purposes.
In a switchroom, a normal lighting branch may be switched locally while the specified emergency luminaires remain connected to their own backed-up or integral supply. For this reference, the drawing identifies “Lighting test request” at the input and “Assigned luminaire test input” at the output. Testing method follows the luminaire system documentation.
Identify the lighting supply type, controlled circuit and the meaning of any test or failure output. A drawing symbol does not establish illumination levels, emergency duration or an approved egress arrangement. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.
How to read it
- Start at the named input: Lighting test request. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Assigned luminaire test input. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Testing method follows the luminaire system documentation.
- Identify the lighting supply type, controlled circuit and the meaning of any test or failure output. A drawing symbol does not establish illumination levels, emergency duration or an approved egress arrangement.
Information to show or reference
- Label the source and connection reference for lighting test request.
- Identify the destination and defined state of assigned luminaire test input.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: Testing method follows the luminaire system documentation.
A distinction that matters
Testing method follows the luminaire system documentation. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
Indoor substation: lighting, fire and auxiliary services
Public technical context for switchroom lighting and access interfaces. Lighting, emergency lighting, fire provisions and substation auxiliary services. Original cause-and-effect examples require project design. The application text and educational graphic are independently authored; the publisher does not certify this representation.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.