GA
Station DC battery rack
A battery rack supports cells or modules for a stationary auxiliary DC system.
General arrangement objects
Functional block · SSII
Switchroom station-DC incoming interface
Functional block · Switchrooms
An independently authored application reference. The drawing shows the named function or circuit relationship; use the project legend and selected equipment documentation for its drafting form and connections.
Browse this installation focusIn plain English
What this block does
Identifies the connection from the station DC distribution to the switchroom control system.
A simple example
In a switchroom, the station battery can continue supplying protection and breaker controls during an AC supply interruption. The alarm system should distinguish charger loss from a low battery condition. For this reference, the drawing identifies “Station DC feeder” at the input and “Room DC distribution” at the output. The feeder boundary differs from the battery boundary.
What the drawings help you do
Start at the named input: Station DC feeder. Identify its source device or document and the state represented on the drawing. Follow the named output: Room DC distribution. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Input
- Station DC feeder
- Output
- Room DC distribution
- Application reference
- An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.
Read the source: MicroGenius S2/S4 battery charger technical manual
Schematic · SSII
What it represents
Identifies the connection from the station DC distribution to the switchroom control system. A room DC interface connects station battery distribution, alarm contacts and operating circuits. DC supplies may remain energized when the room's normal AC supply is unavailable, so their source and distribution boundaries must be shown separately.
In a switchroom, the station battery can continue supplying protection and breaker controls during an AC supply interruption. The alarm system should distinguish charger loss from a low battery condition. For this reference, the drawing identifies “Station DC feeder” at the input and “Room DC distribution” at the output. The feeder boundary differs from the battery boundary.
Identify the DC source, returns and monitored branches. Do not infer battery autonomy, conductor polarity, isolation or earthing arrangements from a generic power block. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.
How to read it
- Start at the named input: Station DC feeder. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Room DC distribution. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- The feeder boundary differs from the battery boundary.
- Identify the DC source, returns and monitored branches. Do not infer battery autonomy, conductor polarity, isolation or earthing arrangements from a generic power block.
Information to show or reference
- Label the source and connection reference for station dc feeder.
- Identify the destination and defined state of room dc distribution.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: The feeder boundary differs from the battery boundary.
A distinction that matters
The feeder boundary differs from the battery boundary. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
MicroGenius S2/S4 battery charger technical manual
Public technical context for switchroom dc interfaces and alarm collection. Battery charging modes, DC distribution interfaces and charger alarms. The application text and educational graphic are independently authored; the publisher does not certify this representation.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.