TX ADJ
Adjustable-ratio transformer
An adjustable-ratio transformer includes a documented means of varying its voltage ratio.
SLD / Schematic
Functional block · TCSR
Transformer cooling stage-one request
Functional block · Substations
An independently authored application reference. The drawing shows the named function or circuit relationship; use the project legend and selected equipment documentation for its drafting form and connections.
Browse this installation focusIn plain English
What this block does
Requests the first documented group of installed cooling equipment.
A simple example
In a substation, a voltage regulator can request a tap change and check the resulting tap-position feedback. A separate controller stages cooling equipment according to the transformer manufacturer's defined conditions. For this reference, the drawing identifies “Thermal-control demand” at the input and “First cooling-group command” at the output. Cooling group composition is transformer-specific.
What the drawings help you do
Start at the named input: Thermal-control demand. Identify its source device or document and the state represented on the drawing. Follow the named output: First cooling-group command. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Input
- Thermal-control demand
- Output
- First cooling-group command
- Application reference
- An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.
Read the source: SEL-2414 transformer monitor
Schematic · TCSR
What it represents
Requests the first documented group of installed cooling equipment. Transformer regulation changes the selected winding connection to influence voltage, while cooling control manages the installed fans and pumps. Commands, mechanical position and measured results belong to different parts of the diagram.
In a substation, a voltage regulator can request a tap change and check the resulting tap-position feedback. A separate controller stages cooling equipment according to the transformer manufacturer's defined conditions. For this reference, the drawing identifies “Thermal-control demand” at the input and “First cooling-group command” at the output. Cooling group composition is transformer-specific.
Keep tap-change permission, limit contacts, movement indication and measured voltage distinct. Actual tap positions, time delays, cooling ratings and allowable parallel operation require the selected transformer control design. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.
How to read it
- Start at the named input: Thermal-control demand. Identify its source device or document and the state represented on the drawing.
- Follow the named output: First cooling-group command. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Cooling group composition is transformer-specific.
- Keep tap-change permission, limit contacts, movement indication and measured voltage distinct. Actual tap positions, time delays, cooling ratings and allowable parallel operation require the selected transformer control design.
Information to show or reference
- Label the source and connection reference for thermal-control demand.
- Identify the destination and defined state of first cooling-group command.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: Cooling group composition is transformer-specific.
A distinction that matters
Cooling group composition is transformer-specific. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
SEL-2414 transformer monitor
Public technical context for transformer regulation and cooling control. Transformer temperature, cooling, tap changing and parallel operation. The application text and educational graphic are independently authored; the publisher does not certify this representation.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
WTI
Winding temperature indicator
Transformer indicator that adds a CT-heated thermal image to top-oil temperature to estimate winding hot-spot temperature.
Schematic / SLD
TCSR
Transformer cooling stage-two request
Requests the next defined cooling group when the selected control condition is reached.
Functional block
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.