Yard gate bonding interface

What it represents

Shows the documented bonding continuity across the assigned moving gate structure. Earthing and lightning interfaces identify the connections between equipment metalwork, primary protection devices and the station earthing network. Their electrical purpose differs from their physical conductor route or electrode geometry.

In a switchyard arrangement, the earthing references help connect each primary equipment structure and surge-protection device to the correct earth-grid interface. Separate details show actual joints, sizes and installation routes. For this reference, the drawing identifies “Gate and fixed fence structure” at the input and “Gate bonding connection” at the output. Mechanical movement requires a suitable bonding arrangement.

Name every connected item and the earthing design reference. The illustrative connection does not establish touch or step voltages, conductor sizing, lightning coverage or safe working conditions. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.

How to read it

• Start at the named input: Gate and fixed fence structure. Identify its source device or document and the state represented on the drawing.
• Follow the named output: Gate bonding connection. Cross-reference its destination and separate the command from confirmation that the equipment responded.
• Mechanical movement requires a suitable bonding arrangement.
• Name every connected item and the earthing design reference. The illustrative connection does not establish touch or step voltages, conductor sizing, lightning coverage or safe working conditions.

Information to show or reference

• Label the source and connection reference for gate and fixed fence structure.
• Identify the destination and defined state of gate bonding connection.
• Record the equipment or control-document revision supporting this functional block.
• Check this application limit in the project design: Mechanical movement requires a suitable bonding arrangement.

Sources you can follow

These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.

About this graphic

This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.

SVG and DXF downloads contain this original artwork. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.