36LYM524_16.54 CAD models & downloads

Which file should I choose?

Use 36LYM524_16.54.step revision C for the supplied solid assembly in your 3D layout.

Use 36LYM524.pdf revision C to read the original manufacturer sheet and its annotations.

Use 36LYM524_18.04.dxf revision C for editable DXF drawing geometry. Keep its original layers and dimension annotations when inserting the drawing.

36LYM524_16.54.sldprt is advertised as SLDPRT. Its native format needs separate software validation before a browser model can be offered.

36LYM524_18.04.igs is advertised as IGS. Its native format needs separate software validation before a browser model can be offered.

36LYM524_18.04.sat is the manufacturer’s ACIS SAT solid file for “36LYM524_18.04”. Open it with a compatible CAD importer. The file structure has been checked; a native-application import and interactive browser conversion have not been performed.

36LYM524_18.04.sldprt is the manufacturer’s SOLIDWORKS part file for “36LYM524_18.04”. Open it with a compatible CAD importer. The file structure has been checked; a native-application import and interactive browser conversion have not been performed.

What is included?

Reference 36LYM524_16.54; 36LYM524 covers “36LYM524_16.54”. 36LYM524.pdf, page 1, includes drive end detail. Select the view matching your GA orientation. The manufacturer sheet identifies motor drawing designation: HOR 182-4T TEFC M, AEGIS INT GND. This page groups 7 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.

Checked source file: 36LYM524_16.54.step · 4.8 MB · STEP.

Before using it

• The supplied configuration is “36LYM524_16.54”. Keep those frame, mounting and accessory codes with the inserted drawing.
• 36LYM524.pdf, page 1, includes drive end detail. Select the view matching your GA orientation.
• The manufacturer sheet identifies motor drawing designation: HOR 182-4T TEFC M, AEGIS INT GND.
• Check the shaft, foot or flange fixing pattern and terminal-box position. An outline does not specify the motor starter, overload setting or cable size.
• 36LYM524_16.54.step has approximate model bounds of 420.3 × 275.5 × 286 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• The supplied configuration is “36LYM524_18.04”. Keep those frame, mounting and accessory codes with the inserted drawing.
• The supplied configuration is “36LYM524: Dimension Sheet”. Keep those frame, mounting and accessory codes with the inserted drawing.
• This page groups 7 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.