36LYN147_18.05 CAD models & downloads

Which file should I choose?

Use 36LYN147_18.05.dxf revision B for editable DXF drawing geometry. Keep its original layers and dimension annotations when inserting the drawing.

Use 36LYN147.pdf revision B to read the original manufacturer sheet and its annotations.

Use 36LYN147_18.05.step revision B for the supplied solid assembly in your 3D layout.

Use 36LYN147_16.55.dxf revision B for editable DXF drawing geometry. Keep its original layers and dimension annotations when inserting the drawing.

36LYN147_18.05.sat is the manufacturer’s ACIS SAT solid file for “36LYN147_18.05”. Open it with a compatible CAD importer. The file structure has been checked; a native-application import and interactive browser conversion have not been performed.

36LYN147_18.05.sldprt is advertised as SLDPRT. Its native format needs separate software validation before a browser model can be offered.

36LYN147_16.55.igs is advertised as IGS. Its native format needs separate software validation before a browser model can be offered.

36LYN147_16.55.sat is the manufacturer’s ACIS SAT solid file for “36LYN147_16.55”. Open it with a compatible CAD importer. The file structure has been checked; a native-application import and interactive browser conversion have not been performed.

What is included?

Reference 36LYN147_18.05; 36LYN147 covers “36LYN147_18.05”. 36LYN147.pdf, page 1, includes drive end detail. Select the view matching your GA orientation. The manufacturer sheet identifies motor drawing designation: HORZ FACE MTD 182-4TC TEFC 36M W/INT SH GND (AEGIS). This page groups 8 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.

Checked source file: 36LYN147_18.05.dxf · 820 KB · DXF.

Before using it

• The supplied configuration is “36LYN147_18.05”. Keep those frame, mounting and accessory codes with the inserted drawing.
• 36LYN147.pdf, page 1, includes drive end detail. Select the view matching your GA orientation.
• The manufacturer sheet identifies motor drawing designation: HORZ FACE MTD 182-4TC TEFC 36M W/INT SH GND (AEGIS).
• Check the shaft, foot or flange fixing pattern and terminal-box position. An outline does not specify the motor starter, overload setting or cable size.
• 36LYN147_18.05.step has approximate model bounds of 458.4 × 270.3 × 288.3 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• The supplied configuration is “36LYN147_16.55”. Keep those frame, mounting and accessory codes with the inserted drawing.
• The supplied configuration is “36LYN147: Dimension Sheet”. Keep those frame, mounting and accessory codes with the inserted drawing.
• This page groups 8 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.