36LYQ160_16.55 CAD models & downloads

Which file should I choose?

Use 36LYQ160_16.55.dwg revision A for editable DWG drawing geometry. Keep its original layers and dimension annotations when inserting the drawing.

Use 36LYQ160.pdf revision A to read the original manufacturer sheet and its annotations.

Use 36LYQ160_16.55.step revision A for the supplied solid assembly in your 3D layout.

Use 36LYQ160_18.05.dwg revision A for editable DWG drawing geometry. Keep its original layers and dimension annotations when inserting the drawing.

36LYQ160_16.55.sat is the manufacturer’s ACIS SAT solid file for “36LYQ160_16.55”. Open it with a compatible CAD importer. The file structure has been checked; a native-application import and interactive browser conversion have not been performed.

36LYQ160_18.05.igs is advertised as IGS. Its native format needs separate software validation before a browser model can be offered.

36LYQ160_18.05.sat is the manufacturer’s ACIS SAT solid file for “36LYQ160_18.05”. Open it with a compatible CAD importer. The file structure has been checked; a native-application import and interactive browser conversion have not been performed.

What is included?

Reference 36LYQ160_16.55; 36LYQ160 covers “36LYQ160_16.55”. 36LYQ160.pdf, page 1, includes drive end detail. Select the view matching your GA orientation. The manufacturer sheet identifies motor drawing designation: HORZ 182-4TC TEFC 36M, BALDOR INT SHAFT GND. This page groups 7 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.

Checked source file: 36LYQ160_16.55.dwg · 426 KB · DWG.

Before using it

• The supplied configuration is “36LYQ160_16.55”. Keep those frame, mounting and accessory codes with the inserted drawing.
• 36LYQ160.pdf, page 1, includes drive end detail. Select the view matching your GA orientation.
• The manufacturer sheet identifies motor drawing designation: HORZ 182-4TC TEFC 36M, BALDOR INT SHAFT GND.
• Check the shaft, foot or flange fixing pattern and terminal-box position. An outline does not specify the motor starter, overload setting or cable size.
• 36LYQ160_16.55.step has approximate model bounds of 420.1 × 227 × 287.5 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• The supplied configuration is “36LYQ160_18.05”. Keep those frame, mounting and accessory codes with the inserted drawing.
• The supplied configuration is “36LYQ160: Dimension Sheet”. Keep those frame, mounting and accessory codes with the inserted drawing.
• This page groups 7 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.