37LYJ838_17.89 CAD models & downloads

Which file should I choose?

Use 37LYJ838_17.89.dwg revision B for editable DWG drawing geometry. Keep its original layers and dimension annotations when inserting the drawing.

Use 37LYJ838.pdf revision B to read the original manufacturer sheet and its annotations.

Use 37LYJ838_17.89.step revision B for the supplied solid assembly in your 3D layout.

Use 37LYJ838_20.51.dxf revision B for editable DXF drawing geometry. Keep its original layers and dimension annotations when inserting the drawing.

Use 37LYJ838_20.52.step revision B for the supplied solid assembly in your 3D layout. Match the 37LYJ838_20.52.STEP: 3D STEP configuration named by ABB.

37LYJ838_17.89.sldprt is the manufacturer’s SOLIDWORKS part file for “37LYJ838_17.89”. Open it with a compatible CAD importer. The file structure has been checked; a native-application import and interactive browser conversion have not been performed.

37LYJ838_19.01.igs is advertised as IGS. Its native format needs separate software validation before a browser model can be offered.

Use 37LYJ838_19.01.step revision B for the supplied solid assembly in your 3D layout. Match the 37LYJ838_19.01.IGS: 3D IGES configuration named by ABB.

37LYJ838_19.01.sldprt is the manufacturer’s SOLIDWORKS part file for “37LYJ838_19.01”. Open it with a compatible CAD importer. The file structure has been checked; a native-application import and interactive browser conversion have not been performed.

Use 37LYJ838_19.01.step revision B for the supplied solid assembly in your 3D layout. Match the 37LYJ838_19.01.sldprt: 3D SOLIDWORKS 2012 configuration named by ABB.

What is included?

Reference 37LYJ838_17.89; 37LYJ838 covers “37LYJ838_17.89”. The manufacturer sheet identifies motor drawing designation: HOR 213-5T TEFC M, AEGIS INT SHAFT GND. This page groups 8 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.

Checked source file: 37LYJ838_17.89.dwg · 411 KB · DWG.

Before using it

• The supplied configuration is “37LYJ838_17.89”. Keep those frame, mounting and accessory codes with the inserted drawing.
• The manufacturer sheet identifies motor drawing designation: HOR 213-5T TEFC M, AEGIS INT SHAFT GND.
• Check the shaft, foot or flange fixing pattern and terminal-box position. An outline does not specify the motor starter, overload setting or cable size.
• 37LYJ838_17.89.step has approximate model bounds of 454.4 × 309.1 × 331.7 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• The supplied configuration is “37LYJ838_20.51”. Keep those frame, mounting and accessory codes with the inserted drawing.
• The supplied configuration is “37LYJ838_20.52”. Keep those frame, mounting and accessory codes with the inserted drawing.
• 37LYJ838_20.52.step has approximate model bounds of 521.4 × 311.8 × 332.3 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• The supplied configuration is “37LYJ838: Dimension Sheet”. Keep those frame, mounting and accessory codes with the inserted drawing.
• The supplied configuration is “37LYJ838_19.01”. Keep those frame, mounting and accessory codes with the inserted drawing.
• This page groups 8 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.