ITSCE 601812861
DXF · 282 KB · Rev E
Original filename: ITSCE_601812861.dxf
Original DXF drawing for 4Pole low voltage MCCB series Isomax - Fixed version extended front terminals S5/630; ABB document ITSCE-601812861
ABB
4Pole low voltage MCCB series Isomax - Fixed version extended front terminals S5/630 CAD drawings & downloads
4Pole low voltage MCCB series Isomax - Fixed version extended front terminals S5/630: ABB manufacturer DXF resource, document ITSCE-601812861, revision E. Use it to coordinate the breaker, switch or accessory arrangement in the switchgear assembly.
DXF · 1 listed file · Source checked 2026-11-03
Download files
Original files · Hosted hereNeed another model or format?
Equipment and file summary
- Equipment / resource
- 4Pole low voltage MCCB series Isomax - Fixed version extended front terminals S5/630
- Manufacturer
- ABB
- Resource type
- Named drawing reference
- Manufacturer drawing
- ITSCE-601812861
- Listed file formats
- DXF
- Listed files
- 1
- Available previews
- 1 drawing previews
- Recorded revisions
- E
- Source checked
- 2026-11-03
- Download access
- Email registration for site downloads; official source links are also available
2D drawing preview
Explore the model in 3D
You can preview the supplied 2D drawings here. Use the original file links above or request a matching model for your exact configuration.
Which file should I choose?
Use ITSCE_601812861.dxf for 4Pole low voltage MCCB series Isomax - Fixed version extended front terminals S5/630. DXF is the supplied drawing format; the preview shows the source sheet. A matching STEP model is not included. Match ABB document ITSCE-601812861 revision E when checking a replacement.
What is included?
4Pole low voltage MCCB series Isomax - Fixed version extended front terminals S5/630 lists 1 file route from ABB. Drawing content: circuit breaker or mounting accessory, manufacturer drawing.
Checked source file: ITSCE_601812861.dxf · 282 KB · DXF.
Before using it
- Match the configuration named “4Pole low voltage MCCB series Isomax - Fixed version extended front terminals S5/630”; terminal direction, mounting version and pole options can change the outline.
- Use ABB document ITSCE-601812861, revision E, to check the mounting and connection details before placing this item in the assembly.
- The source names front terminals. Reserve access to the front connections and check any extended-terminal option shown in the drawing.
- The source identifies the fixed version. Match its mounting and connections to the fixed equipment arrangement in the assembly.
- Read the actual dimensions and notes in ITSCE_601812861.dxf; a 2D outline does not provide a complete 3D assembly.
In plain English
What the equipment does
A circuit breaker opens and closes a power circuit and can interrupt it when its protection or trip system responds to a fault.
A simple example
When coordinating 4Pole low voltage MCCB series Isomax - Fixed version extended front terminals S5/630 in switchgear, place the documented arrangement beside the adjacent equipment and compare its fixing and connection access with the source drawing.
Questions about this resource
Which ABB source identifies 4Pole low voltage MCCB series Isomax - Fixed version extended front terminals S5/630?
The acquired file is ITSCE_601812861.dxf, document ITSCE-601812861, revision E. The manufacturer source and pinned original link appear below.
Does the preview establish installation clearances?
No. Use the installation requirements for 4Pole low voltage MCCB series Isomax - Fixed version extended front terminals S5/630 and the selected assembly to reserve cable and service access.
Equipment references and drawing guides
Related GA equipment
Electrical drawing guides →Use in a project
Sources & versions
Original publisher: ABB. Source checked 2026-11-03. Original bytes are preserved; file links and document references identify the source.
- ITSCE 601812861
ITSCE_601812861.dxf ↗ · Rev E · Acquired 2026-11-03 · ABB
- Manufacturer
- ABB
- Resource
- Named drawing reference
- Formats
- DXF
- Regional source coverage
- Global
Manufacturer library discovery does not establish regional certification. Match the listed frame, terminal arrangement and accessories to the project.
Verified file identity
ITSCE_601812861.dxf · DXF · 288,459 bytes
SHA-256: 169a744c0967a935867bae56551d8febffc50e091df7f742d1255be73cd29f84More breakers & accessories · More ABB drawings · Request other equipment