E1.2/E1.3 III W TERMINALS HR LOWER - UL CAD models & downloads

Which file should I choose?

Use 1SDH001336R0036_1PA_001_00_E1.2_W_III_TERMINALS_HR_UL_LOWER.stp revision A for the supplied solid assembly in your 3D layout.

Use 1SDH001336R0077_1PA_001_00_E1.2_W_IV_TERMINALS_HR_UL_LOWER.stp revision A for the supplied solid assembly in your 3D layout. Match the E1.2/E1.3 IV W TERMINALS HR LOWER - UL configuration named by ABB.

Use 1SDH001336R0078_1PA_001_00_E1.2_W_IV_TERMINALS_HR_UL_UPPER.stp revision A for the supplied solid assembly in your 3D layout. Match the E1.2/E1.3 IV W TERMINALS HR UPPER - UL configuration named by ABB.

What is included?

Reference 1SDH001336R0036 covers “E1.2/E1.3 III W TERMINALS HR LOWER - UL”. The supplied configuration is “E1.2/E1.3 III W TERMINALS HR LOWER - UL”. Keep those frame, mounting and accessory codes with the inserted drawing. This page groups 3 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.

Checked source file: 1SDH001336R0036_1PA_001_00_E1.2_W_III_TERMINALS_HR_UL_LOWER.stp · 736 KB · STEP.

Before using it

• This reference covers the connection or accessory named in “E1.2/E1.3 III W TERMINALS HR LOWER - UL”. It is not the complete breaker-and-compartment assembly.
• The supplied configuration is “E1.2/E1.3 III W TERMINALS HR LOWER - UL”. Keep those frame, mounting and accessory codes with the inserted drawing.
• Use the exact frame, pole and mounting configuration named by this reference. Door drilling, connection and accessory drawings describe those interfaces rather than a complete switchboard.
• 1SDH001336R0036_1PA_001_00_E1.2_W_III_TERMINALS_HR_UL_LOWER.stp has approximate model bounds of 254 × 115.5 × 44 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• This reference covers the connection or accessory named in “E1.2/E1.3 IV W TERMINALS HR LOWER - UL”. It is not the complete breaker-and-compartment assembly.
• The supplied configuration is “E1.2/E1.3 IV W TERMINALS HR LOWER - UL”. Keep those frame, mounting and accessory codes with the inserted drawing.
• 1SDH001336R0077_1PA_001_00_E1.2_W_IV_TERMINALS_HR_UL_LOWER.stp has approximate model bounds of 254 × 115.5 × 44 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• This reference covers the connection or accessory named in “E1.2/E1.3 IV W TERMINALS HR UPPER - UL”. It is not the complete breaker-and-compartment assembly.
• The supplied configuration is “E1.2/E1.3 IV W TERMINALS HR UPPER - UL”. Keep those frame, mounting and accessory codes with the inserted drawing.
• 1SDH001336R0078_1PA_001_00_E1.2_W_IV_TERMINALS_HR_UL_UPPER.stp has approximate model bounds of 254 × 115.5 × 44 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• This page groups 3 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.