E6.2/E6.3 IV FS F TERMINALS HR LOWER 6300A CAD models & downloads

Which file should I choose?

Use 1SDH001252R0257_1PA_001_01_E6.2_IV_FS_F_TERMINALS_HR_LOWER_6300A.stp revision A for the supplied solid assembly in your 3D layout.

Use 1SDH001252R0259_1PA_001_01_E6.2_IV_FS_F_TERMINALS_HR_UPPER_6300A.stp revision A for the supplied solid assembly in your 3D layout. Match the E6.2/E6.3 IV FS F TERMINALS HR UPPER 6300A configuration named by ABB.

What is included?

Reference 1SDH001252R0257 covers “E6.2/E6.3 IV FS F TERMINALS HR LOWER 6300A”. The supplied configuration is “E6.2/E6.3 IV FS F TERMINALS HR LOWER 6300A”. Keep those frame, mounting and accessory codes with the inserted drawing. This page groups 2 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.

Checked source file: 1SDH001252R0257_1PA_001_01_E6.2_IV_FS_F_TERMINALS_HR_LOWER_6300A.stp · 2.2 MB · STEP.

Before using it

• This reference covers the connection or accessory named in “E6.2/E6.3 IV FS F TERMINALS HR LOWER 6300A”. It is not the complete breaker-and-compartment assembly.
• The supplied configuration is “E6.2/E6.3 IV FS F TERMINALS HR LOWER 6300A”. Keep those frame, mounting and accessory codes with the inserted drawing.
• Use the exact frame, pole and mounting configuration named by this reference. Door drilling, connection and accessory drawings describe those interfaces rather than a complete switchboard.
• 1SDH001252R0257_1PA_001_01_E6.2_IV_FS_F_TERMINALS_HR_LOWER_6300A.stp has approximate model bounds of 962 × 61 × 80 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• This reference covers the connection or accessory named in “E6.2/E6.3 IV FS F TERMINALS HR UPPER 6300A”. It is not the complete breaker-and-compartment assembly.
• The supplied configuration is “E6.2/E6.3 IV FS F TERMINALS HR UPPER 6300A”. Keep those frame, mounting and accessory codes with the inserted drawing.
• 1SDH001252R0259_1PA_001_01_E6.2_IV_FS_F_TERMINALS_HR_UPPER_6300A.stp has approximate model bounds of 962 × 61 × 80 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• This page groups 2 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.