E6.2 III F CAD models & downloads

Which file should I choose?

Use 1SDH001252R0223_1PA_001_01_E6.2_III_F.stp revision A for the supplied solid assembly in your 3D layout.

Use 1SDH001336R0223_1PA_001_00_E6.2_III_F_UL.stp revision A for the supplied solid assembly in your 3D layout. Match the E6.2 III F - UL configuration named by ABB.

What is included?

Reference 1SDH001252R0223 covers “E6.2 III F”. This page groups 2 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.

Checked source file: 1SDH001252R0223_1PA_001_01_E6.2_III_F.stp · 1.7 MB · STEP.

Before using it

• The supplied configuration is “E6.2 III F”. Keep those frame, mounting and accessory codes with the inserted drawing.
• Use the exact frame, pole and mounting configuration named by this reference. Door drilling, connection and accessory drawings describe those interfaces rather than a complete switchboard.
• 1SDH001252R0223_1PA_001_01_E6.2_III_F.stp has approximate model bounds of 818 × 270 × 371 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• The supplied configuration is “E6.2 III F - UL”. Keep those frame, mounting and accessory codes with the inserted drawing.
• 1SDH001336R0223_1PA_001_00_E6.2_III_F_UL.stp has approximate model bounds of 818 × 270 × 371 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• This page groups 2 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.