ITSCE 601812871
DXF · 292 KB · Rev E
Original filename: ITSCE_601812871.dxf
Original DXF drawing for rear terminals for fixed S5/630 3p; ABB document ITSCE-601812871
ABB
rear terminals for fixed S5/630 3p CAD drawings & downloads
rear terminals for fixed S5/630 3p: ABB manufacturer DXF resource, document ITSCE-601812871, revision E. Use it to coordinate the panel mounting and connection layout inside the switchroom.
DXF · 1 listed file · Source checked 2026-11-03
Download files
Original files · Hosted hereNeed another model or format?
Equipment and file summary
- Equipment / resource
- rear terminals for fixed S5/630 3p
- Manufacturer
- ABB
- Resource type
- Named drawing reference
- Manufacturer drawing
- ITSCE-601812871
- Listed file formats
- DXF
- Listed files
- 1
- Available previews
- 1 drawing previews
- Recorded revisions
- E
- Source checked
- 2026-11-03
- Download access
- Email registration for site downloads; official source links are also available
2D drawing preview
Explore the model in 3D
You can preview the supplied 2D drawings here. Use the original file links above or request a matching model for your exact configuration.
Which file should I choose?
Use ITSCE_601812871.dxf for rear terminals for fixed S5/630 3p. DXF is the supplied drawing format; the preview shows the source sheet. A matching STEP model is not included. Match ABB document ITSCE-601812871 revision E when checking a replacement.
What is included?
rear terminals for fixed S5/630 3p lists 1 file route from ABB. Drawing content: terminal and mounting component, manufacturer drawing.
Checked source file: ITSCE_601812871.dxf · 292 KB · DXF.
Before using it
- Match the configuration named “rear terminals for fixed S5/630 3p”; terminal direction, mounting version and pole options can change the outline.
- Use ABB document ITSCE-601812871, revision E, to check the mounting and connection details before placing this item in the assembly.
- The source names rear terminals. Check the connections behind the device and coordinate the busbar or cable approach from the rear.
- Read the actual dimensions and notes in ITSCE_601812871.dxf; a 2D outline does not provide a complete 3D assembly.
In plain English
What the equipment does
A terminal provides an identified point for joining wires to equipment or to other wires. Terminal strips organise those connections so they can be wired and checked.
A simple example
When coordinating rear terminals for fixed S5/630 3p in switchrooms, place the documented arrangement beside the adjacent equipment and compare its fixing and connection access with the source drawing.
Questions about this resource
Which ABB source identifies rear terminals for fixed S5/630 3p?
The acquired file is ITSCE_601812871.dxf, document ITSCE-601812871, revision E. The manufacturer source and pinned original link appear below.
Does the preview establish installation clearances?
No. Use the installation requirements for rear terminals for fixed S5/630 3p and the selected assembly to reserve cable and service access.
Equipment references and drawing guides
Related GA equipment
Electrical drawing guides →Use in a project
Sources & versions
Original publisher: ABB. Source checked 2026-11-03. Original bytes are preserved; file links and document references identify the source.
- ITSCE 601812871
ITSCE_601812871.dxf ↗ · Rev E · Acquired 2026-11-03 · ABB
- Manufacturer
- ABB
- Resource
- Named drawing reference
- Formats
- DXF
- Regional source coverage
- Global
Manufacturer library discovery does not establish regional certification. Match the listed frame, terminal arrangement and accessories to the project.
Verified file identity
ITSCE_601812871.dxf · DXF · 298,721 bytes
SHA-256: bd1ba73e2ceaf07ca1c1c0ef3111aebab6808faf36afcaebaeeafa734d63e2dbMore wiring & terminals · More ABB drawings · Request other equipment