ITSCE 605032011
DXF · 343 KB · Rev E
Original filename: ITSCE_605032011.dxf
Original DXF drawing for S3X 4p Fixed version Front and rear terminals for cable connection; ABB document ITSCE-605032011
ABB
S3X 4p Fixed version Front and rear terminals for cable connection CAD drawings & downloads
S3X 4p Fixed version Front and rear terminals for cable connection: ABB manufacturer DXF resource, document ITSCE-605032011, revision E. Use it to coordinate the panel mounting and connection layout inside the switchroom.
DXF · 1 listed file · Source checked 2026-11-03
Download files
Original files · Hosted hereNeed another model or format?
Equipment and file summary
- Equipment / resource
- S3X 4p Fixed version Front and rear terminals for cable connection
- Manufacturer
- ABB
- Resource type
- Named drawing reference
- Manufacturer drawing
- ITSCE-605032011
- Listed file formats
- DXF
- Listed files
- 1
- Available previews
- 1 drawing previews
- Recorded revisions
- E
- Source checked
- 2026-11-03
- Download access
- Email registration for site downloads; official source links are also available
2D drawing preview
Explore the model in 3D
You can preview the supplied 2D drawings here. Use the original file links above or request a matching model for your exact configuration.
Which file should I choose?
Use ITSCE_605032011.dxf for S3X 4p Fixed version Front and rear terminals for cable connection. DXF is the supplied drawing format; the preview shows the source sheet. A matching STEP model is not included. Match ABB document ITSCE-605032011 revision E when checking a replacement.
What is included?
S3X 4p Fixed version Front and rear terminals for cable connection lists 1 file route from ABB. Drawing content: terminal and mounting component, manufacturer drawing.
Checked source file: ITSCE_605032011.dxf · 343 KB · DXF.
Before using it
- Match the configuration named “S3X 4p Fixed version Front and rear terminals for cable connection”; terminal direction, mounting version and pole options can change the outline.
- Use ABB document ITSCE-605032011, revision E, to check the mounting and connection details before placing this item in the assembly.
- The source names rear terminals. Check the connections behind the device and coordinate the busbar or cable approach from the rear.
- The source identifies the fixed version. Match its mounting and connections to the fixed equipment arrangement in the assembly.
- Read the actual dimensions and notes in ITSCE_605032011.dxf; a 2D outline does not provide a complete 3D assembly.
In plain English
What the equipment does
A terminal provides an identified point for joining wires to equipment or to other wires. Terminal strips organise those connections so they can be wired and checked.
A simple example
When coordinating S3X 4p Fixed version Front and rear terminals for cable connection in switchrooms, place the documented arrangement beside the adjacent equipment and compare its fixing and connection access with the source drawing.
Questions about this resource
Which ABB source identifies S3X 4p Fixed version Front and rear terminals for cable connection?
The acquired file is ITSCE_605032011.dxf, document ITSCE-605032011, revision E. The manufacturer source and pinned original link appear below.
Does the preview establish installation clearances?
No. Use the installation requirements for S3X 4p Fixed version Front and rear terminals for cable connection and the selected assembly to reserve cable and service access.
Equipment references and drawing guides
Related GA equipment
Electrical drawing guides →Use in a project
Sources & versions
Original publisher: ABB. Source checked 2026-11-03. Original bytes are preserved; file links and document references identify the source.
- ITSCE 605032011
ITSCE_605032011.dxf ↗ · Rev E · Acquired 2026-11-03 · ABB
- Manufacturer
- ABB
- Resource
- Named drawing reference
- Formats
- DXF
- Regional source coverage
- Global
Manufacturer library discovery does not establish regional certification. Match the listed frame, terminal arrangement and accessories to the project.
Verified file identity
ITSCE_605032011.dxf · DXF · 351,454 bytes
SHA-256: f7b2ba55f34fe193f03ea85a4c9aa316a2debaadf6741c15d9241c9a51b74db1More wiring & terminals · More ABB drawings · Request other equipment