XT2 4p FIXED PS 25mm UP CAD models & downloads

Which file should I choose?

Use 1SDH001295R0308_1PA_001_00_XT2_4P_FIXED_PS_25mm_SUP.stp revision A for the supplied solid assembly in your 3D layout.

Use 1SDH001295R0351_1PA_001_00_XT2_4P_PLUG_IN_PS_25mm_SUP.stp revision A for the supplied solid assembly in your 3D layout. Match the XT2 4p PLUG-IN PS 25mm UP configuration named by ABB.

Use 1SDH001295R0394_1PA_001_00_XT2_4P_WITHDRAWABLE_PS_25mm_SUP.stp revision A for the supplied solid assembly in your 3D layout. Match the XT2 4p WITHDRAWABLE PS 25mm UP configuration named by ABB.

What is included?

Reference 1SDH001295R0308 covers “XT2 4p FIXED PS 25mm UP”. This page groups 3 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.

Checked source file: 1SDH001295R0308_1PA_001_00_XT2_4P_FIXED_PS_25mm_SUP.stp · 73 KB · STEP.

Before using it

• The supplied configuration is “XT2 4p FIXED PS 25mm UP”. Keep those frame, mounting and accessory codes with the inserted drawing.
• Use the exact frame, pole and mounting configuration named by this reference. Door drilling, connection and accessory drawings describe those interfaces rather than a complete switchboard.
• 1SDH001295R0308_1PA_001_00_XT2_4P_FIXED_PS_25mm_SUP.stp has approximate model bounds of 68 × 80.5 × 29 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• The supplied configuration is “XT2 4p PLUG-IN PS 25mm UP”. Keep those frame, mounting and accessory codes with the inserted drawing.
• 1SDH001295R0351_1PA_001_00_XT2_4P_PLUG_IN_PS_25mm_SUP.stp has approximate model bounds of 68 × 80.5 × 29 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• The supplied configuration is “XT2 4p WITHDRAWABLE PS 25mm UP”. Keep those frame, mounting and accessory codes with the inserted drawing.
• 1SDH001295R0394_1PA_001_00_XT2_4P_WITHDRAWABLE_PS_25mm_SUP.stp has approximate model bounds of 68 × 80.5 × 29 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• This page groups 3 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.