XT2 4p PLUG-IN EXTERNAL TERMINALS FCCuAl 2x95mm2 LOW CAD models & downloads

Which file should I choose?

Use 1SDH001295R0352_1PA_001_00_XT2_4P_PLUG_IN_TERMINALI_ESTERNI_F.stp revision A for the supplied solid assembly in your 3D layout.

Use 1SDH001295R0398_1PA_001_00_XT2_4P_WITHDRAWABLE_TERMINALI_ESTE.stp revision A for the supplied solid assembly in your 3D layout. Match the XT2 4p WITHDRAWABLE EXTERNAL TERMINALS FCCuAl 2x95mm2 LOW configuration named by ABB.

What is included?

Reference 1SDH001295R0352 covers “XT2 4p PLUG-IN EXTERNAL TERMINALS FCCuAl 2x95mm2 LOW”. The supplied configuration is “XT2 4p PLUG-IN EXTERNAL TERMINALS FCCuAl 2x95mm2 LOW”. Keep those frame, mounting and accessory codes with the inserted drawing. This page groups 2 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.

Checked source file: 1SDH001295R0352_1PA_001_00_XT2_4P_PLUG_IN_TERMINALI_ESTERNI_F.stp · 187 KB · STEP.

Before using it

• This reference covers the connection or accessory named in “XT2 4p PLUG-IN EXTERNAL TERMINALS FCCuAl 2x95mm2 LOW”. It is not the complete breaker-and-compartment assembly.
• The supplied configuration is “XT2 4p PLUG-IN EXTERNAL TERMINALS FCCuAl 2x95mm2 LOW”. Keep those frame, mounting and accessory codes with the inserted drawing.
• Use the exact frame, pole and mounting configuration named by this reference. Door drilling, connection and accessory drawings describe those interfaces rather than a complete switchboard.
• 1SDH001295R0352_1PA_001_00_XT2_4P_PLUG_IN_TERMINALI_ESTERNI_F.stp has approximate model bounds of 114 × 53 × 54.8 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• This reference covers the connection or accessory named in “XT2 4p WITHDRAWABLE EXTERNAL TERMINALS FCCuAl 2x95mm2 LOW”. It is not the complete breaker-and-compartment assembly.
• The supplied configuration is “XT2 4p WITHDRAWABLE EXTERNAL TERMINALS FCCuAl 2x95mm2 LOW”. Keep those frame, mounting and accessory codes with the inserted drawing.
• 1SDH001295R0398_1PA_001_00_XT2_4P_WITHDRAWABLE_TERMINALI_ESTE.stp has approximate model bounds of 114 × 53 × 54.8 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• This page groups 2 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.