XT2 4p PLUG-IN EXTERNAL TERMINALS LOW CAD models & downloads

Which file should I choose?

Use 1SDH001295R0354_1PA_001_00_XT2_4P_PLUG_IN_TERMINALI_ESTERNI_I.stp revision A for the supplied solid assembly in your 3D layout.

Use 1SDH001295R0400_1PA_001_00_XT2_4P_WITHDRAWABLE_TERMINALI_ESTE.stp revision A for the supplied solid assembly in your 3D layout. Match the XT2 4p WITHDRAWABLE EXTERNAL TERMINALS LOW configuration named by ABB.

What is included?

Reference 1SDH001295R0354 covers “XT2 4p PLUG-IN EXTERNAL TERMINALS LOW”. The supplied configuration is “XT2 4p PLUG-IN EXTERNAL TERMINALS LOW”. Keep those frame, mounting and accessory codes with the inserted drawing. This page groups 2 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.

Checked source file: 1SDH001295R0354_1PA_001_00_XT2_4P_PLUG_IN_TERMINALI_ESTERNI_I.stp · 122 KB · STEP.

Before using it

• This reference covers the connection or accessory named in “XT2 4p PLUG-IN EXTERNAL TERMINALS LOW”. It is not the complete breaker-and-compartment assembly.
• The supplied configuration is “XT2 4p PLUG-IN EXTERNAL TERMINALS LOW”. Keep those frame, mounting and accessory codes with the inserted drawing.
• Use the exact frame, pole and mounting configuration named by this reference. Door drilling, connection and accessory drawings describe those interfaces rather than a complete switchboard.
• 1SDH001295R0354_1PA_001_00_XT2_4P_PLUG_IN_TERMINALI_ESTERNI_I.stp has approximate model bounds of 113.1 × 39.8 × 48.9 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• This reference covers the connection or accessory named in “XT2 4p WITHDRAWABLE EXTERNAL TERMINALS LOW”. It is not the complete breaker-and-compartment assembly.
• The supplied configuration is “XT2 4p WITHDRAWABLE EXTERNAL TERMINALS LOW”. Keep those frame, mounting and accessory codes with the inserted drawing.
• 1SDH001295R0400_1PA_001_00_XT2_4P_WITHDRAWABLE_TERMINALI_ESTE.stp has approximate model bounds of 113.1 × 39.8 × 48.9 mm (approximate X × Y × Z bounds of the tessellated source model). Compare these model axes with the installation orientation; mounting and service clearances are separate requirements.
• This page groups 2 source references for the same configuration or model geometry. The file list retains the separate formats and source revisions.