Isolator
Disconnector
A switching device providing an electrical isolation function.
SLD / Schematic
IEEE / ANSI · Isolator
ANSI/IEEE disconnector symbol
IEEE-oriented graphical reference for disconnector, with public vendor evidence and drawing-reading notes.
IEEE / ANSI · Autodesk IEEE-oriented Disconnect 1 Pole functional form
Autodesk explicitly publishes this block under IEEE Symbol Preview. The counterpart is the matching functional concept; no equivalence of every detailed standard graphic is asserted.
Shown as an independently authored educational illustration. Use the cited publication and drawing legend to verify the required drafting form.
SLD / Schematic · Isolator
What it represents
The IEEE-oriented disconnector form identifies a separable power-circuit path. Its operating state and main-device tag guide the reader to the isolation and interlocking information; electrical duty must be established from the specified equipment.
This is a convention-specific lookup based on the publisher's IEEE-labelled preview. The geometry here is independently drawn to explain the connection or operation; it is not a certified reproduction of the standard graphic.
How to read it
- Read a shown gap as a documented contact state, not a full operating instruction.
- Read the selected library and the project legend together. A vendor block identifier is meaningful within its named library and is not a universal standard-symbol code.
Information to show or reference
- Name disconnector
- State reference position
- Link electrical duty/interlocks
A distinction that matters
A disconnector's isolation function is different from a protective device's automatic fault interruption.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
Autodesk IEEE Symbol Preview — Disconnect 1 Pole
Exact public IEEE-oriented category page verifying the component name and vendor block identifier.
IEEE/ANSI 315-1975: graphic symbols for electrical and electronics diagrams
Graphic-symbol standards context and official status; not a source of reproduced artwork.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. DXF uses unscaled drawing units; a GA envelope supplies no product dimensions, clearances or fabrication information. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
LBS
Load-break switch
A switch with a specified capability to make and break normal load current.
SLD / Schematic
CB
Circuit breaker
A switching device that can interrupt a circuit, with specified fault-interruption capability.
SLD / Schematic
ES
Earthing switch
A switch used to connect an identified circuit section to earth.
SLD / Schematic
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.