MGC
Microgrid controller
The supervisory controller that dispatches sources, storage and loads and manages islanding and reconnection of a microgrid.
SLD / Schematic
Functional block · MIMC
Microgrid islanded mode coordinator
Functional block · Microgrids
An independently authored application reference. The drawing shows the named function or circuit relationship; use the project legend and selected equipment documentation for its drafting form and connections.
Browse this installation focusIn plain English
What this block does
Coordinates the defined local voltage, frequency and resource controls after the island state is established.
A simple example
In a microgrid serving a switchroom and industrial loads, the controller can move between grid-connected and islanded operating states only through its defined transition logic. Each state needs identifiable source roles and feedback. For this reference, the drawing identifies “Established island condition” at the input and “Islanded control state” at the output. Resource roles must be compatible with island operation.
What the drawings help you do
Start at the named input: Established island condition. Identify its source device or document and the state represented on the drawing. Follow the named output: Islanded control state. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Input
- Established island condition
- Output
- Islanded control state
- Application reference
- An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.
Read the source: Microgrid operating modes and transitions management
Schematic · MIMC
What it represents
Coordinates the defined local voltage, frequency and resource controls after the island state is established. A microgrid operating-mode function coordinates how local sources and loads relate to the utility connection. The selected mode, the measured electrical condition and the actual switching configuration can differ during a transition.
In a microgrid serving a switchroom and industrial loads, the controller can move between grid-connected and islanded operating states only through its defined transition logic. Each state needs identifiable source roles and feedback. For this reference, the drawing identifies “Established island condition” at the input and “Islanded control state” at the output. Resource roles must be compatible with island operation.
Show the requested mode, entry conditions, completion feedback and failure indication. These functional blocks explain control responsibilities and do not specify a ready-to-use operating sequence or grid-connection approval. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.
How to read it
- Start at the named input: Established island condition. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Islanded control state. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Resource roles must be compatible with island operation.
- Show the requested mode, entry conditions, completion feedback and failure indication. These functional blocks explain control responsibilities and do not specify a ready-to-use operating sequence or grid-connection approval.
Information to show or reference
- Label the source and connection reference for established island condition.
- Identify the destination and defined state of islanded control state.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: Resource roles must be compatible with island operation.
A distinction that matters
Resource roles must be compatible with island operation. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
Microgrid operating modes and transitions management
Public technical context for microgrid operating-mode controls. Grid-connected and island modes, transitions, topology and authority. The application text and educational graphic are independently authored; the publisher does not certify this representation.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.