MGC
Microgrid controller
The supervisory controller that dispatches sources, storage and loads and manages islanding and reconnection of a microgrid.
SLD / Schematic
Functional block · MOMA
Microgrid operating-mode mismatch alarm
Functional block · Microgrids
An independently authored application reference. The drawing shows the named function or circuit relationship; use the project legend and selected equipment documentation for its drafting form and connections.
Browse this installation focusIn plain English
What this block does
Detects disagreement between the requested mode and the established circuit arrangement or resource state.
A simple example
In a microgrid serving a switchroom and industrial loads, the controller can move between grid-connected and islanded operating states only through its defined transition logic. Each state needs identifiable source roles and feedback. For this reference, the drawing identifies “Requested and observed modes” at the input and “Mode mismatch indication” at the output. The allowed transition interval must be defined.
What the drawings help you do
Start at the named input: Requested and observed modes. Identify its source device or document and the state represented on the drawing. Follow the named output: Mode mismatch indication. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Input
- Requested and observed modes
- Output
- Mode mismatch indication
- Application reference
- An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.
Read the source: Microgrid operating modes and transitions management
Schematic · MOMA
What it represents
Detects disagreement between the requested mode and the established topology or resource state. A microgrid operating-mode function coordinates how local sources and loads relate to the utility connection. The selected mode, the measured electrical condition and the actual switching configuration can differ during a transition.
In a microgrid serving a switchroom and industrial loads, the controller can move between grid-connected and islanded operating states only through its defined transition logic. Each state needs identifiable source roles and feedback. For this reference, the drawing identifies “Requested and observed modes” at the input and “Mode mismatch indication” at the output. The allowed transition interval must be defined.
Show the requested mode, entry conditions, completion feedback and failure indication. These functional blocks explain control responsibilities and do not specify a ready-to-use operating sequence or grid-connection approval. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.
How to read it
- Start at the named input: Requested and observed modes. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Mode mismatch indication. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- The allowed transition interval must be defined.
- Show the requested mode, entry conditions, completion feedback and failure indication. These functional blocks explain control responsibilities and do not specify a ready-to-use operating sequence or grid-connection approval.
Information to show or reference
- Label the source and connection reference for requested and observed modes.
- Identify the destination and defined state of mode mismatch indication.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: The allowed transition interval must be defined.
A distinction that matters
The allowed transition interval must be defined. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
Microgrid operating modes and transitions management
Public technical context for microgrid operating-mode controls. Grid-connected and island modes, transitions, topology and authority. The application text and educational graphic are independently authored; the publisher does not certify this representation.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
GFM
Grid-forming inverter
An inverter controlled as a voltage source that sets its own voltage and frequency, able to energise and hold up an island.
SLD
MCMI
Microgrid controller manual-mode interface
Identifies the documented manual control authority and its assigned automatic restraints.
Functional block
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.