GA
Station DC battery rack
A battery rack supports cells or modules for a stationary auxiliary DC system.
General arrangement objects
Functional block · SDBOI
Station DC bus-tie operating interface
Functional block · Substations
An independently authored application reference. The drawing shows the named function or circuit relationship; use the project legend and selected equipment documentation for its drafting form and connections.
Browse this installation focusIn plain English
What this block does
Identifies the command and conditions associated with the selected DC bus connection.
A simple example
In a substation control building, the battery can support breaker trip circuits while the charger AC supply is unavailable. Supervision must identify whether the charger, battery or a downstream feeder is affected. For this reference, the drawing identifies “DC tie command and states” at the input and “Assigned bus-tie action” at the output. DC-source compatibility must be assessed.
What the drawings help you do
Start at the named input: DC tie command and states. Identify its source device or document and the state represented on the drawing. Follow the named output: Assigned bus-tie action. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Input
- DC tie command and states
- Output
- Assigned bus-tie action
- Application reference
- An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.
Read the source: MicroGenius S2/S4 battery charger technical manual
Schematic · SDBOI
What it represents
Identifies the command and conditions associated with the selected DC bus connection. A station battery system supplies protection, control and other assigned DC loads through a documented charger and distribution arrangement. Charger output, battery contribution and load distribution are related but separately monitored paths.
In a substation control building, the battery can support breaker trip circuits while the charger AC supply is unavailable. Supervision must identify whether the charger, battery or a downstream feeder is affected. For this reference, the drawing identifies “DC tie command and states” at the input and “Assigned bus-tie action” at the output. DC-source compatibility must be assessed.
Identify every source, protective device, isolation boundary and return. Battery capacity, DC fault duty, charging settings and ventilation require the selected battery-system design; illustrative circuits do not establish autonomy. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.
How to read it
- Start at the named input: DC tie command and states. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Assigned bus-tie action. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- DC-source compatibility must be assessed.
- Identify every source, protective device, isolation boundary and return. Battery capacity, DC fault duty, charging settings and ventilation require the selected battery-system design; illustrative circuits do not establish autonomy.
Information to show or reference
- Label the source and connection reference for dc tie command and states.
- Identify the destination and defined state of assigned bus-tie action.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: DC-source compatibility must be assessed.
A distinction that matters
DC-source compatibility must be assessed. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
MicroGenius S2/S4 battery charger technical manual
Public technical context for station battery and charger distribution. Battery charging modes, DC distribution interfaces and charger alarms. The application text and educational graphic are independently authored; the publisher does not certify this representation.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.