Which file should I choose?
Use 1STD002044.stp (revision A) to place the original solid geometry in your 3D assembly. The ZIP contains the unmodified 1STD002044.stp.
System pro E power - 1STQ008780A0000
- Equipment / resource
- System pro E power - 1STQ008780A0000
- Manufacturer
- ABB
- Resource type
- Product
- Part number
- 1STQ008780A0000
- Manufacturer configuration
- SEGR.VERT.REAR H=400MM W=600MM INT.UP. - 3D DRAWING
- Source-model envelope
- 395 × 227 × 22 mm
Downloads & Requests
About this equipment
What it does
ABB System pro E power - 1STQ008780A0000: original STEP for switchboard enclosure or mounting hardware layouts. SEGR.VERT.REAR H=400MM W=600MM INT.UP. - 3D DRAWING.
In plain English
Switchgear groups the devices that connect, disconnect and protect power circuits. A switchboard takes an incoming supply and distributes it to outgoing circuits.
Create 2D and 3D drawings by describing what you need
- Create 2D and 3D from a description
- Edit in plain words
- Add equipment like the System pro E power - 1STQ008780A0000
2D drawing and 3D model · Sample project
Choosing and using the files
What is included?
1 inspected original for ABB System pro E power - 1STQ008780A0000: 1STD002044.stp (STEP). The manufacturer describes this configuration as SEGR.VERT.REAR H=400MM W=600MM INT.UP. - 3D DRAWING.
Before using it
- Match the recorded manufacturer configuration: SEGR.VERT.REAR H=400MM W=600MM INT.UP. - 3D DRAWING
- The supplied model has approximate X × Y × Z bounds of 395 × 227 × 22 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
- The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
- The source was checked on 2026-11-11; recorded file revisions: 1STD002044.stp — A. Use Documentation & sources to check for a newer issue.
File details & source
1STD002044
STEP · 125 KB · Rev A
Download filename: 1STD002044.stp
Original manufacturer STEP geometry
Questions about this resource
Which original files are supplied for System pro E power - 1STQ008780A0000?
1 inspected original for ABB System pro E power - 1STQ008780A0000: 1STD002044.stp (STEP). The manufacturer describes this configuration as SEGR.VERT.REAR H=400MM W=600MM INT.UP. - 3D DRAWING.
Where did these ABB files come from?
ABB supplied the original files through https://search.abb.com/library/Download.aspx?DocumentID=1STD002044&LanguageCode=en&DocumentPartId=&Action=Launch. The source reference, revision, original bytes and checksum are retained with each download.
Documentation & sources
File origin and additional details
Original publisher: ABB. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
- 1STD002044
1STD002044.stp ↗ · Rev A · Acquired 2026-11-11 · ABB
- Manufacturer
- ABB
- Resource
- Product · 1STQ008780A0000
- Formats
- STEP
- Regional source coverage
- Global
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More enclosures & hardware · More ABB drawings · Request other equipment