Which file should I choose?
Use NHP-DTATM-Throughterminal-3D-CAD-Block.stp to place the original solid geometry in your 3D assembly. The ZIP contains the unmodified NHP-DTATM-Throughterminal-3D-CAD-Block.stp.
DIN-T DTATM Throughterminal
- Equipment / resource
- DIN-T DTATM Throughterminal
- Manufacturer
- NHP
- Resource type
- Product
- Source-model envelope
- 85 × 69.7 × 17.4 mm
Downloads & Requests
About this equipment
What it does
NHP DIN-T DTATM Throughterminal: original STEP for terminal or connection hardware layouts.
In plain English
A terminal provides an identified point for joining wires to equipment or to other wires. Terminal strips organise those connections so they can be wired and checked.
Create 2D and 3D drawings by describing what you need
- Create 2D and 3D from a description
- Edit in plain words
- Add equipment from this library
2D drawing and 3D model · Sample project
Choosing and using the files
What is included?
1 inspected original for NHP DIN-T DTATM Throughterminal: NHP-DTATM-Throughterminal-3D-CAD-Block.stp (STEP).
Before using it
- Match NHP DIN-T DTATM Throughterminal and the exact source filename shown above.
- The supplied model has approximate X × Y × Z bounds of 85 × 69.7 × 17.4 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
- The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
- The source was checked on 2026-11-11. Use Documentation & sources to check for a newer issue.
File details & source
NHP-DTATM-Throughterminal-3D-CAD-Block
STEP · 226 KB
Original filename: NHP-DTATM-Throughterminal-3D-CAD-Block.stp
Original manufacturer STEP geometry
Questions about this resource
Which original files are supplied for DIN-T DTATM Throughterminal?
1 inspected original for NHP DIN-T DTATM Throughterminal: NHP-DTATM-Throughterminal-3D-CAD-Block.stp (STEP).
Where did these NHP files come from?
NHP Electrical Engineering Products supplied the original files through https://www.nhpnz.co.nz/Resources/Downloads. The source reference, revision, original bytes and checksum are retained with each download.
Documentation & sources
File origin and additional details
Original publisher: NHP Electrical Engineering Products. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
- NHP-DTATM-Throughterminal-3D-CAD-Block
NHP-DTATM-Throughterminal-3D-CAD-Block.stp ↗ · Acquired 2026-11-11 · NHP Electrical Engineering Products
- Manufacturer
- NHP
- Resource
- Product
- Formats
- STEP
- Regional source coverage
- Global
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More wiring & terminals · More NHP drawings · Request other equipment