Which file should I choose?
Use 553570-Flexibar-Clamp-DWG-2D-CAD-Block.dwg to insert the supplied editable drawing into your layout.
Use 553570-Flexibar-Clamp-STEP-3D-CAD-Block.step to place the original solid geometry in your 3D assembly.
553570 Flexibar Clamp
- Equipment / resource
- 553570 Flexibar Clamp
- Manufacturer
- nVent ERIFLEX
- Resource type
- Product
- Part number
- 553570
- Source-model envelope
- 166 × 126 × 24 mm
Downloads & Requests
About this equipment
What it does
nVent ERIFLEX 553570 Flexibar Clamp: original DWG / STEP for terminal or connection hardware layouts.
In plain English
A terminal provides an identified point for joining wires to equipment or to other wires. Terminal strips organise those connections so they can be wired and checked.
Create 2D and 3D drawings by describing what you need
- Create 2D and 3D from a description
- Edit in plain words
- Add equipment from this library
2D drawing and 3D model · Sample project
Choosing and using the files
What is included?
2 inspected originals for nVent ERIFLEX 553570 Flexibar Clamp: 553570-Flexibar-Clamp-DWG-2D-CAD-Block.dwg (DWG); 553570-Flexibar-Clamp-STEP-3D-CAD-Block.step (STEP).
Before using it
- Match nVent ERIFLEX 553570 and the exact source filename shown above.
- The supplied model has approximate X × Y × Z bounds of 166 × 126 × 24 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
- The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
- The source was checked on 2026-11-11. Use Documentation & sources to check for a newer issue.
File details & source
553570-Flexibar-Clamp-DWG-2D-CAD-Block
DWG · 199 KB
Original filename: 553570-Flexibar-Clamp-DWG-2D-CAD-Block.dwg
Original manufacturer DWG geometry
553570-Flexibar-Clamp-STEP-3D-CAD-Block
STEP · 1.6 MB
Original filename: 553570-Flexibar-Clamp-STEP-3D-CAD-Block.step
Original manufacturer STEP geometry
Questions about this resource
Which original files are supplied for 553570 Flexibar Clamp?
2 inspected originals for nVent ERIFLEX 553570 Flexibar Clamp: 553570-Flexibar-Clamp-DWG-2D-CAD-Block.dwg (DWG); 553570-Flexibar-Clamp-STEP-3D-CAD-Block.step (STEP).
Where did these nVent ERIFLEX files come from?
NHP Electrical Engineering Products supplied the original files through https://www.nhpnz.co.nz/Resources/Downloads. The source reference, revision, original bytes and checksum are retained with each download.
Documentation & sources
File origin and additional details
Original publisher: NHP Electrical Engineering Products. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
- 553570-Flexibar-Clamp-DWG-2D-CAD-Block
553570-Flexibar-Clamp-DWG-2D-CAD-Block.dwg ↗ · Acquired 2026-11-11 · NHP Electrical Engineering Products - 553570-Flexibar-Clamp-STEP-3D-CAD-Block
553570-Flexibar-Clamp-STEP-3D-CAD-Block.step ↗ · Acquired 2026-11-11 · NHP Electrical Engineering Products
- Manufacturer
- nVent ERIFLEX
- Resource
- Product · 553570
- Formats
- DWG / STEP
- Regional source coverage
- Global
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More wiring & terminals · More nVent ERIFLEX drawings · Request other equipment