Which file should I choose?
Use NVENT-EKSS20084316-2D-CAD-Block.dxf to insert the supplied editable drawing into your layout.
Use nVent-HOFFMAN-EKSS20084316-3D-CAD-Block.stp to place the original solid geometry in your 3D assembly.
EKSS20084316
- Equipment / resource
- EKSS20084316
- Manufacturer
- nVent HOFFMAN
- Resource type
- Product
- Part number
- EKSS20084316
- Source-model envelope
- 800 × 2000 × 437 mm
Downloads & Requests
About this equipment
What it does
nVent HOFFMAN EKSS20084316: original DXF / STEP for switchboard enclosure or mounting hardware layouts.
In plain English
Switchgear groups the devices that connect, disconnect and protect power circuits. A switchboard takes an incoming supply and distributes it to outgoing circuits.
Create 2D and 3D drawings by describing what you need
- Create 2D and 3D from a description
- Edit in plain words
- Add equipment from this library
2D drawing and 3D model · Sample project
Choosing and using the files
What is included?
2 inspected originals for nVent HOFFMAN EKSS20084316: NVENT-EKSS20084316-2D-CAD-Block.dxf (DXF); nVent-HOFFMAN-EKSS20084316-3D-CAD-Block.stp (STEP).
Before using it
- Match nVent HOFFMAN EKSS20084316 and the exact source filename shown above.
- The supplied model has approximate X × Y × Z bounds of 800 × 2000 × 437 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
- The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
- The source was checked on 2026-11-11. Use Documentation & sources to check for a newer issue.
File details & source
NVENT-EKSS20084316-2D-CAD-Block
DXF · 2.5 MB
Original filename: NVENT-EKSS20084316-2D-CAD-Block.dxf
Original manufacturer DXF geometry
nVent-HOFFMAN-EKSS20084316-3D-CAD-Block
STEP · 2.5 MB
Original filename: nVent-HOFFMAN-EKSS20084316-3D-CAD-Block.stp
Original manufacturer STEP geometry
Questions about this resource
Which original files are supplied for EKSS20084316?
2 inspected originals for nVent HOFFMAN EKSS20084316: NVENT-EKSS20084316-2D-CAD-Block.dxf (DXF); nVent-HOFFMAN-EKSS20084316-3D-CAD-Block.stp (STEP).
Where did these nVent HOFFMAN files come from?
NHP Electrical Engineering Products supplied the original files through https://www.nhpnz.co.nz/Resources/Downloads. The source reference, revision, original bytes and checksum are retained with each download.
Documentation & sources
File origin and additional details
Original publisher: NHP Electrical Engineering Products. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
- NVENT-EKSS20084316-2D-CAD-Block
NVENT-EKSS20084316-2D-CAD-Block.dxf ↗ · Acquired 2026-11-11 · NHP Electrical Engineering Products - nVent-HOFFMAN-EKSS20084316-3D-CAD-Block
nVent-HOFFMAN-EKSS20084316-3D-CAD-Block.stp ↗ · Acquired 2026-11-11 · NHP Electrical Engineering Products
- Manufacturer
- nVent HOFFMAN
- Resource
- Product · EKSS20084316
- Formats
- DXF / STEP
- Regional source coverage
- Global
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More enclosures & hardware · More nVent HOFFMAN drawings · Request other equipment