Which file should I choose?
Use 35080-3D_CAD.stp (revision 1.0) to place the original solid geometry in your 3D assembly. The ZIP contains the unmodified 35080-3D_CAD.stp.
Control unit MicroLogic 6.0E, ComPacT NS, IEC, selective and earth-fault protections
- Equipment / resource
- Control unit MicroLogic 6.0E, ComPacT NS, IEC, selective and earth-fault protections
- Manufacturer
- Schneider Electric
- Resource type
- Product
- Source-model envelope
- 58.2 × 199.6 × 74.6 mm
Downloads & Requests
About this equipment
What it does
Schneider Electric Control unit MicroLogic 6.0E, ComPacT NS, IEC, selective and earth-fault protections: original STEP for circuit-breaker equipment layouts.
In plain English
A circuit breaker opens and closes a power circuit and can interrupt it when its protection or trip system responds to a fault.
Create 2D and 3D drawings by describing what you need
- Create 2D and 3D from a description
- Edit in plain words
- Add equipment from this library
2D drawing and 3D model · Sample project
Choosing and using the files
What is included?
1 inspected original for Schneider Electric Control unit MicroLogic 6.0E, ComPacT NS, IEC, selective and earth-fault protections: 35080-3D_CAD.stp (STEP).
Before using it
- Match Schneider Electric Control unit MicroLogic 6.0E, ComPacT NS, IEC, selective and earth-fault protections and the exact source filename shown above.
- The supplied model has approximate X × Y × Z bounds of 58.2 × 199.6 × 74.6 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
- The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
- The source was checked on 2026-11-11; recorded file revisions: 35080-3D_CAD.stp — 1.0. Use Documentation & sources to check for a newer issue.
File details & source
35080-3D CAD
STEP · 288 KB · Rev 1.0
Original filename: 35080-3D_CAD.stp
Original manufacturer STEP geometry
Questions about this resource
Which original files are supplied for Control unit MicroLogic 6.0E, ComPacT NS, IEC, selective and earth-fault protections?
1 inspected original for Schneider Electric Control unit MicroLogic 6.0E, ComPacT NS, IEC, selective and earth-fault protections: 35080-3D_CAD.stp (STEP).
Where did these Schneider Electric files come from?
Schneider Electric supplied the original files through https://www.se.com/us/en/download/document/35080-3D_CAD/. The source reference, revision, original bytes and checksum are retained with each download.
Documentation & sources
File origin and additional details
Original publisher: Schneider Electric. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
- 35080-3D CAD
35080-3D_CAD.stp ↗ · Rev 1.0 · Acquired 2026-11-11 · Schneider Electric
- Manufacturer
- Schneider Electric
- Resource
- Product
- Formats
- STEP
- Regional source coverage
- Global
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More breakers & accessories · More Schneider Electric drawings · Request other equipment