Which file should I choose?
Use xesd1291-3dCAD_2D-front.DXF (revision 1.0) to insert the supplied editable drawing into your layout.
Use xesd1291-3dCAD.stp (revision 1.0) to place the original solid geometry in your 3D assembly.
Harmony XAC, Double contact block, spring return, 2-speed, snap action, 2 NO + 1 C/O
- Equipment / resource
- Harmony XAC, Double contact block, spring return, 2-speed, snap action, 2 NO + 1 C/O
- Manufacturer
- Schneider Electric
- Resource type
- Product
- Source-model envelope
- 80 × 64 × 59 mm
Downloads & Requests
About this equipment
What it does
Schneider Electric Harmony XAC, Double contact block, spring return, 2-speed, snap action, 2 NO + 1 C/O: original DXF / STEP for terminal or connection hardware layouts.
In plain English
A terminal provides an identified point for joining wires to equipment or to other wires. Terminal strips organise those connections so they can be wired and checked.
Create 2D and 3D drawings by describing what you need
- Create 2D and 3D from a description
- Edit in plain words
- Add equipment from this library
2D drawing and 3D model · Sample project
Choosing and using the files
What is included?
2 inspected originals for Schneider Electric Harmony XAC, Double contact block, spring return, 2-speed, snap action, 2 NO + 1 C/O: xesd1291-3dCAD_2D-front.DXF (DXF); xesd1291-3dCAD.stp (STEP).
Before using it
- Match Schneider Electric Harmony XAC, Double contact block, spring return, 2-speed, snap action, 2 NO + 1 C/O and the exact source filename shown above.
- The supplied model has approximate X × Y × Z bounds of 80 × 64 × 59 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
- The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
- The source was checked on 2026-11-11; recorded file revisions: xesd1291-3dCAD_2D-front.DXF — 1.0; xesd1291-3dCAD.stp — 1.0. Use Documentation & sources to check for a newer issue.
File details & source
xesd1291-3dCAD 2D-front
DXF · 106 KB · Rev 1.0
Original filename: xesd1291-3dCAD_2D-front.DXF
Original manufacturer DXF geometry
xesd1291-3dCAD
STEP · 98 KB · Rev 1.0
Original filename: xesd1291-3dCAD.stp
Original manufacturer STEP geometry
Questions about this resource
Which original files are supplied for Harmony XAC, Double contact block, spring return, 2-speed, snap action, 2 NO + 1 C/O?
2 inspected originals for Schneider Electric Harmony XAC, Double contact block, spring return, 2-speed, snap action, 2 NO + 1 C/O: xesd1291-3dCAD_2D-front.DXF (DXF); xesd1291-3dCAD.stp (STEP).
Where did these Schneider Electric files come from?
Schneider Electric supplied the original files through https://www.se.com/us/en/download/document/XESD1291-3dCAD/. The source reference, revision, original bytes and checksum are retained with each download.
Documentation & sources
File origin and additional details
Original publisher: Schneider Electric. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
- xesd1291-3dCAD 2D-front
xesd1291-3dCAD_2D-front.DXF ↗ · Rev 1.0 · Acquired 2026-11-11 · Schneider Electric - xesd1291-3dCAD
xesd1291-3dCAD.stp ↗ · Rev 1.0 · Acquired 2026-11-11 · Schneider Electric
- Manufacturer
- Schneider Electric
- Resource
- Product
- Formats
- DXF / STEP
- Regional source coverage
- Global
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More wiring & terminals · More Schneider Electric drawings · Request other equipment