Schneider Electric Harmony XB4, Single contact block, silver alloy, screw clamp terminal, 1 NC with monitoring: original DXF / STEP for terminal or connection hardware layouts.
A terminal provides an identified point for joining wires to equipment or to other wires. Terminal strips organise those connections so they can be wired and checked.
Use zbe302-3dCAD_2D-front.DXF (revision 1.0) to insert the supplied editable drawing into your layout.
Use zbe302-3dCAD.stp (revision 1.0) to place the original solid geometry in your 3D assembly. The ZIP contains the unmodified zbe302-3dCAD.stp.
2 inspected originals for Schneider Electric Harmony XB4, Single contact block, silver alloy, screw clamp terminal, 1 NC with monitoring: zbe302-3dCAD_2D-front.DXF (DXF); zbe302-3dCAD.stp (STEP).
DXF · 125 KB · Rev 1.0
Original filename: zbe302-3dCAD_2D-front.DXF
Original manufacturer DXF geometry
STEP · 435 KB · Rev 1.0
Original filename: zbe302-3dCAD.stp
Original manufacturer STEP geometry
2 inspected originals for Schneider Electric Harmony XB4, Single contact block, silver alloy, screw clamp terminal, 1 NC with monitoring: zbe302-3dCAD_2D-front.DXF (DXF); zbe302-3dCAD.stp (STEP).
Schneider Electric supplied the original files through https://www.se.com/us/en/download/document/ZBE302-3dCAD/. The source reference, revision, original bytes and checksum are retained with each download.
Original publisher: Schneider Electric. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More wiring & terminals · More Schneider Electric drawings · Request other equipment