Which file should I choose?
Use ZALVM3-3d.stp (revision 1.2) to place the original solid geometry in your 3D assembly. The ZIP contains the unmodified ZALVM3-3d.stp.
Light block for head Ø22, green, integral LED, mounting in back of enclosure, screw clamp terminal, 24 V AC/DC
- Equipment / resource
- Light block for head Ø22, green, integral LED, mounting in back of enclosure, screw clamp terminal, 24 V AC/DC
- Manufacturer
- Schneider Electric
- Resource type
- Product
- Source-model envelope
- 9.8 × 32 × 43.7 mm
Downloads & Requests
About this equipment
What it does
Schneider Electric Light block for head Ø22, green, integral LED, mounting in back of enclosure, screw clamp terminal, 24 V AC/DC: original STEP for terminal or connection hardware layouts.
In plain English
An LED produces light when operated with the appropriate electrical current. It is commonly used to indicate an electronic device's state.
Create 2D and 3D drawings by describing what you need
- Create 2D and 3D from a description
- Edit in plain words
- Add equipment from this library
2D drawing and 3D model · Sample project
Choosing and using the files
What is included?
1 inspected original for Schneider Electric Light block for head Ø22, green, integral LED, mounting in back of enclosure, screw clamp terminal, 24 V AC/DC: ZALVM3-3d.stp (STEP).
Before using it
- Match Schneider Electric Light block for head Ø22, green, integral LED, mounting in back of enclosure, screw clamp terminal, 24 V AC/DC and the exact source filename shown above.
- The supplied model has approximate X × Y × Z bounds of 9.8 × 32 × 43.7 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
- The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
- The source was checked on 2026-11-11; recorded file revisions: ZALVM3-3d.stp — 1.2. Use Documentation & sources to check for a newer issue.
File details & source
ZALVM3
STEP · 462 KB · Rev 1.2
Original filename: ZALVM3-3d.stp
Original manufacturer STEP geometry
Questions about this resource
Which original files are supplied for Light block for head Ø22, green, integral LED, mounting in back of enclosure, screw clamp terminal, 24 V AC/DC?
1 inspected original for Schneider Electric Light block for head Ø22, green, integral LED, mounting in back of enclosure, screw clamp terminal, 24 V AC/DC: ZALVM3-3d.stp (STEP).
Where did these Schneider Electric files come from?
Schneider Electric supplied the original files through https://www.se.com/us/en/download/document/ZALVM3-3d/. The source reference, revision, original bytes and checksum are retained with each download.
Documentation & sources
File origin and additional details
Original publisher: Schneider Electric. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
- ZALVM3
ZALVM3-3d.stp ↗ · Rev 1.2 · Acquired 2026-11-11 · Schneider Electric
- Manufacturer
- Schneider Electric
- Resource
- Product
- Formats
- STEP
- Regional source coverage
- Global
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More wiring & terminals · More Schneider Electric drawings · Request other equipment