Which file should I choose?
Use NSYMP5M8_2D-front.dxf (revision 1.0) to insert the supplied editable drawing into your layout.
Use NSYMP5M8_3D-simplified.stp (revision 1.0) to place the original solid geometry in your 3D assembly.
Mounting plate - 250x800 mm - 5M
- Equipment / resource
- Mounting plate - 250x800 mm - 5M
- Manufacturer
- Schneider Electric
- Resource type
- Product
- Source-model envelope
- 690 × 210 × 2 mm
Downloads & Requests
About this equipment
What it does
Schneider Electric Mounting plate - 250x800 mm - 5M: original DXF / STEP for switchboard enclosure or mounting hardware layouts.
In plain English
Mounting hardware holds equipment in its intended position. Rails, plates, adapters and supports each provide a particular attachment or support arrangement.
Create 2D and 3D drawings by describing what you need
- Create 2D and 3D from a description
- Edit in plain words
- Add equipment like the Mounting plate - 250x800 mm - 5M
2D drawing and 3D model · Sample project
Choosing and using the files
What is included?
2 inspected originals for Schneider Electric Mounting plate - 250x800 mm - 5M: NSYMP5M8_2D-front.dxf (DXF); NSYMP5M8_3D-simplified.stp (STEP).
Before using it
- Match Schneider Electric Mounting plate - 250x800 mm - 5M and the exact source filename shown above.
- The supplied model has approximate X × Y × Z bounds of 690 × 210 × 2 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
- The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
- The source was checked on 2026-11-11; recorded file revisions: NSYMP5M8_2D-front.dxf — 1.0; NSYMP5M8_3D-simplified.stp — 1.0. Use Documentation & sources to check for a newer issue.
File details & source
NSYMP5M8 2D-front
DXF · 18 KB · Rev 1.0
Original filename: NSYMP5M8_2D-front.dxf
Original manufacturer DXF geometry
NSYMP5M8 3D-simplified
STEP · 94 KB · Rev 1.0
Original filename: NSYMP5M8_3D-simplified.stp
Original manufacturer STEP geometry
Questions about this resource
Which original files are supplied for Mounting plate - 250x800 mm - 5M?
2 inspected originals for Schneider Electric Mounting plate - 250x800 mm - 5M: NSYMP5M8_2D-front.dxf (DXF); NSYMP5M8_3D-simplified.stp (STEP).
Where did these Schneider Electric files come from?
Schneider Electric supplied the original files through https://www.se.com/us/en/download/document/NSYMP5M8_3D-CAD/. The source reference, revision, original bytes and checksum are retained with each download.
Documentation & sources
File origin and additional details
Original publisher: Schneider Electric. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
- NSYMP5M8 2D-front
NSYMP5M8_2D-front.dxf ↗ · Rev 1.0 · Acquired 2026-11-11 · Schneider Electric - NSYMP5M8 3D-simplified
NSYMP5M8_3D-simplified.stp ↗ · Rev 1.0 · Acquired 2026-11-11 · Schneider Electric
- Manufacturer
- Schneider Electric
- Resource
- Product
- Formats
- DXF / STEP
- Regional source coverage
- Global
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More enclosures & hardware · More Schneider Electric drawings · Request other equipment