Which file should I choose?
Use NSYPTZ3_2D-front.dxf (revision V1) to insert the supplied editable drawing into your layout.
Use NSYPTZ3_3D-Simplified.stp (revision V1) to place the original solid geometry in your 3D assembly.
PanelSeT PLA - NSYPTZ3 - PLA adapt plate 320 depth 1 door
- Equipment / resource
- PanelSeT PLA - NSYPTZ3 - PLA adapt plate 320 depth 1 door
- Manufacturer
- Schneider Electric
- Resource type
- Product
- Source-model envelope
- 717.4 × 13 × 190 mm
Downloads & Requests
About this equipment
What it does
Schneider Electric PanelSeT PLA - NSYPTZ3 - PLA adapt plate 320 depth 1 door: original DXF / STEP for switchboard enclosure or mounting hardware layouts.
In plain English
Switchgear groups the devices that connect, disconnect and protect power circuits. A switchboard takes an incoming supply and distributes it to outgoing circuits.
Create 2D and 3D drawings by describing what you need
- Create 2D and 3D from a description
- Edit in plain words
- Add equipment from this library
2D drawing and 3D model · Sample project
Choosing and using the files
What is included?
2 inspected originals for Schneider Electric PanelSeT PLA - NSYPTZ3 - PLA adapt plate 320 depth 1 door: NSYPTZ3_2D-front.dxf (DXF); NSYPTZ3_3D-Simplified.stp (STEP).
Before using it
- Match Schneider Electric PanelSeT PLA - NSYPTZ3 - PLA adapt plate 320 depth 1 door and the exact source filename shown above.
- The supplied model has approximate X × Y × Z bounds of 717.4 × 13 × 190 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
- The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
- The source was checked on 2026-11-11; recorded file revisions: NSYPTZ3_2D-front.dxf — V1; NSYPTZ3_3D-Simplified.stp — V1. Use Documentation & sources to check for a newer issue.
File details & source
NSYPTZ3 2D-front
DXF · 19 KB · Rev V1
Original filename: NSYPTZ3_2D-front.dxf
Original manufacturer DXF geometry
NSYPTZ3 3D-Simplified
STEP · 91 KB · Rev V1
Original filename: NSYPTZ3_3D-Simplified.stp
Original manufacturer STEP geometry
Questions about this resource
Which original files are supplied for PanelSeT PLA - NSYPTZ3 - PLA adapt plate 320 depth 1 door?
2 inspected originals for Schneider Electric PanelSeT PLA - NSYPTZ3 - PLA adapt plate 320 depth 1 door: NSYPTZ3_2D-front.dxf (DXF); NSYPTZ3_3D-Simplified.stp (STEP).
Where did these Schneider Electric files come from?
Schneider Electric supplied the original files through https://www.se.com/us/en/download/document/NSYPTZ3_3D-CAD/. The source reference, revision, original bytes and checksum are retained with each download.
Documentation & sources
File origin and additional details
Original publisher: Schneider Electric. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
- NSYPTZ3 2D-front
NSYPTZ3_2D-front.dxf ↗ · Rev V1 · Acquired 2026-11-11 · Schneider Electric - NSYPTZ3 3D-Simplified
NSYPTZ3_3D-Simplified.stp ↗ · Rev V1 · Acquired 2026-11-11 · Schneider Electric
- Manufacturer
- Schneider Electric
- Resource
- Product
- Formats
- DXF / STEP
- Regional source coverage
- Global
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More enclosures & hardware · More Schneider Electric drawings · Request other equipment