Which file should I choose?
Use MCADID0002061_2D-front.dxf (revision 1.0) to insert the supplied editable drawing into your layout.
Use MCADID0002061_3D-simplified.stp (revision 1.0) to place the original solid geometry in your 3D assembly.
Solid state relay,Plug-in, 2/3.5A
- Equipment / resource
- Solid state relay,Plug-in, 2/3.5A
- Manufacturer
- Schneider Electric
- Resource type
- Product
- Source-model envelope
- 5 × 28 × 18.8 mm
Downloads & Requests
About this equipment
What it does
Schneider Electric Solid state relay,Plug-in, 2/3.5A: original DXF / STEP for protection or metering equipment layouts.
In plain English
A connector provides a connection that can be separated without permanently joining the wires. Its matching parts and ratings determine what it can connect.
Create 2D and 3D drawings by describing what you need
- Create 2D and 3D from a description
- Edit in plain words
- Add equipment like the Solid state relay,Plug-in, 2/3.5A
2D drawing and 3D model · Sample project
Choosing and using the files
What is included?
2 inspected originals for Schneider Electric Solid state relay,Plug-in, 2/3.5A: MCADID0002061_2D-front.dxf (DXF); MCADID0002061_3D-simplified.stp (STEP).
Before using it
- Match Schneider Electric Solid state relay,Plug-in, 2/3.5A and the exact source filename shown above.
- The supplied model has approximate X × Y × Z bounds of 5 × 28 × 18.8 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
- The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
- The source was checked on 2026-11-11; recorded file revisions: MCADID0002061_2D-front.dxf — 1.0; MCADID0002061_3D-simplified.stp — 1.0. Use Documentation & sources to check for a newer issue.
File details & source
MCADID0002061 2D-front
DXF · 13 KB · Rev 1.0
Original filename: MCADID0002061_2D-front.dxf
Original manufacturer DXF geometry
MCADID0002061 3D-simplified
STEP · 33 KB · Rev 1.0
Original filename: MCADID0002061_3D-simplified.stp
Original manufacturer STEP geometry
Questions about this resource
Which original files are supplied for Solid state relay,Plug-in, 2/3.5A?
2 inspected originals for Schneider Electric Solid state relay,Plug-in, 2/3.5A: MCADID0002061_2D-front.dxf (DXF); MCADID0002061_3D-simplified.stp (STEP).
Where did these Schneider Electric files come from?
Schneider Electric supplied the original files through https://www.se.com/us/en/download/document/MCADID0002061_3D-CAD/. The source reference, revision, original bytes and checksum are retained with each download.
Documentation & sources
File origin and additional details
Original publisher: Schneider Electric. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
- MCADID0002061 2D-front
MCADID0002061_2D-front.dxf ↗ · Rev 1.0 · Acquired 2026-11-11 · Schneider Electric - MCADID0002061 3D-simplified
MCADID0002061_3D-simplified.stp ↗ · Rev 1.0 · Acquired 2026-11-11 · Schneider Electric
- Manufacturer
- Schneider Electric
- Resource
- Product
- Formats
- DXF / STEP
- Regional source coverage
- Global
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More protection & metering · More Schneider Electric drawings · Request other equipment