Schneider Electric TeSys GS - GS1 side and front mounted red operator for switch disconnector CAD models & downloads

About this equipment

What it does

Schneider Electric TeSys GS - GS1 side and front mounted red operator for switch disconnector: original DXF / STEP for terminal or connection hardware layouts.

In plain English

A disconnector separates equipment from its supply under its specified conditions. Whether it can also interrupt load current depends on the device's switching rating.

Choosing and using the files

Which file should I choose?

Use MCADPD0003802_2D-front.dxf (revision 1.0) to insert the supplied editable drawing into your layout.

Use MCADPD0003802_3D-simplified.stp (revision 1.0) to place the original solid geometry in your 3D assembly. The ZIP contains the unmodified MCADPD0003802_3D-simplified.stp.

What is included?

2 inspected originals for Schneider Electric TeSys GS - GS1 side and front mounted red operator for switch disconnector: MCADPD0003802_2D-front.dxf (DXF); MCADPD0003802_3D-simplified.stp (STEP).

Before using it

Match Schneider Electric TeSys GS - GS1 side and front mounted red operator for switch disconnector and the exact source filename shown above.
The supplied model has approximate X × Y × Z bounds of 107 × 75.7 × 73.4 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
The source was checked on 2026-11-11; recorded file revisions: MCADPD0003802_2D-front.dxf — 1.0; MCADPD0003802_3D-simplified.stp — 1.0. Use Documentation & sources to check for a newer issue.

File details & source

MCADPD0003802 2D-front

DXF · 24 KB · Rev 1.0

Original filename: MCADPD0003802_2D-front.dxf

Original manufacturer DXF geometry

Download DXF ↓Original source ↗

MCADPD0003802 3D-simplified

STEP · 37 KB · Rev 1.0

Original filename: MCADPD0003802_3D-simplified.stp

Original manufacturer STEP geometry

Download ZIP ↓Original source ↗

Questions about this resource

Which original files are supplied for TeSys GS - GS1 side and front mounted red operator for switch disconnector?

2 inspected originals for Schneider Electric TeSys GS - GS1 side and front mounted red operator for switch disconnector: MCADPD0003802_2D-front.dxf (DXF); MCADPD0003802_3D-simplified.stp (STEP).

Where did these Schneider Electric files come from?

Schneider Electric supplied the original files through https://www.se.com/us/en/download/document/MCADPD0003802_3D-CAD/. The source reference, revision, original bytes and checksum are retained with each download.

Documentation & sources

File origin and additional details

Original publisher: Schneider Electric. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.

MCADPD0003802 2D-front
MCADPD0003802_2D-front.dxf ↗ · Rev 1.0 · Acquired 2026-11-11 · Schneider Electric
MCADPD0003802 3D-simplified
MCADPD0003802_3D-simplified.stp ↗ · Rev 1.0 · Acquired 2026-11-11 · Schneider Electric

Manufacturer: Schneider Electric
Resource: Product
Formats: DXF / STEP
Regional source coverage: Global

Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.

More wiring & terminals · More Schneider Electric drawings · Request other equipment

TeSys GS - GS1 side and front mounted red operator for switch disconnector

Downloads & Requests

Request CAD

Choose documents & file formats (optional)

Project details Optional · helps us request the right variant