GC
Genset controller
The device controller that starts, protects and synchronises a generating set and controls its breaker.
SLD / Schematic
Functional block · MGWCI
Microgrid generator warm-up completion interface
Functional block · Microgrids
An independently authored application reference. The drawing shows the named function or circuit relationship; use the project legend and selected equipment documentation for its drafting form and connections.
Browse this installation focusIn plain English
What this block does
Receives the documented ready-for-load condition after the generating set starts.
A simple example
In a microgrid power station, the controller can request an additional generator when available reserve falls and later unload a selected machine before its documented stop sequence. For this reference, the drawing identifies “Generator warm-up state” at the input and “Load-acceptance readiness” at the output. The generator controller defines its readiness conditions.
What the drawings help you do
Start at the named input: Generator warm-up state. Identify its source device or document and the state represented on the drawing. Follow the named output: Load-acceptance readiness. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- Input
- Generator warm-up state
- Output
- Load-acceptance readiness
- Application reference
- An explanation of a named drawing function or circuit relationship; the project documents define the equipment and its connections.
Read the source: AGC power management options G4, G5 and G8
Schematic · MGWCI
What it represents
Receives the documented ready-for-load condition after the generating set starts. Generating-set coordination decides which available machines should operate and how their power contribution is shared. Engine starting, breaker connection, load acceptance and stopping are separate stages with their own feedback.
In a microgrid power station, the controller can request an additional generator when available reserve falls and later unload a selected machine before its documented stop sequence. For this reference, the drawing identifies “Generator warm-up state” at the input and “Load-acceptance readiness” at the output. The generator controller defines its readiness conditions.
Preserve the engine and generator electrical boundaries, command authority and source readiness. Starting duty, minimum loading, synchronising, fuel systems and cooling behavior require the selected generator documentation. The functional block is an independent explanation of this named application. Equipment-specific ratings, terminal connections and operating conditions must be established in the project documentation.
How to read it
- Start at the named input: Generator warm-up state. Identify its source device or document and the state represented on the drawing.
- Follow the named output: Load-acceptance readiness. Cross-reference its destination and separate the command from confirmation that the equipment responded.
- The generator controller defines its readiness conditions.
- Preserve the engine and generator electrical boundaries, command authority and source readiness. Starting duty, minimum loading, synchronising, fuel systems and cooling behavior require the selected generator documentation.
Information to show or reference
- Label the source and connection reference for generator warm-up state.
- Identify the destination and defined state of load-acceptance readiness.
- Record the equipment or control-document revision supporting this functional block.
- Check this application limit in the project design: The generator controller defines its readiness conditions.
A distinction that matters
The generator controller defines its readiness conditions. This reference describes the named application; it does not establish a new IEC graphical symbol, an ANSI device-function number or an exact manufacturer connection diagram.
Sources you can follow
These public references support the explanation and provide further detail. Their graphics and downloadable files remain with their publishers.
AGC power management options G4, G5 and G8
Public technical context for microgrid generating-set coordination. Generator start/stop, load sharing, reserve and power management. The application text and educational graphic are independently authored; the publisher does not certify this representation.
About this graphic
This illustration was authored independently by Elora Grid to explain the concept. It is not reproduced from a customer drawing, an official standard graphic or a manufacturer CAD file. Its correspondence to an exact IEC or IEEE symbol identifier has not been certified.
SVG and DXF downloads contain this original artwork. Original artwork is available under CC BY 4.0. Third-party references retain their own terms.
Explore related references
DG
Diesel generator set
A compression-ignition engine coupled to an alternator, shown as a source on microgrid and standby power single-line diagrams.
SLD
MGBR
Microgrid generator breaker-connect request
Requests the assigned generator connection after the selected readiness and synchronising conditions.
Functional block
Put the reference into a drawing workflow.
Elora Grid helps electrical teams work with drawings, specifications and equipment information. Explore the drafting workflow or join the early-access waitlist.