Which file should I choose?
Use OT90-125GFCC3_STEP.STP.stp (revision A) to place the original solid geometry in your 3D assembly. The ZIP contains the unmodified OT90-125GFCC3_STEP.STP.stp.
OT90..125GFCC3
- Equipment / resource
- OT90..125GFCC3
- Manufacturer
- ABB
- Resource type
- Product
- Manufacturer configuration
- OT125GFCC3A, OT125GFCC3T, OT90GFCC3A, OT90GFCC3T, igs-file
- Source-model envelope
- 279 × 379 × 176.1 mm
Downloads & Requests
About this equipment
What it does
ABB OT90..125GFCC3: original STEP for switching or transfer equipment layouts. OT125GFCC3A, OT125GFCC3T, OT90GFCC3A, OT90GFCC3T, igs-file.
In plain English
Switchgear groups the devices that connect, disconnect and protect power circuits. A switchboard takes an incoming supply and distributes it to outgoing circuits.
Create 2D and 3D drawings by describing what you need
- Create 2D and 3D from a description
- Edit in plain words
- Add equipment from this library
2D drawing and 3D model · Sample project
Choosing and using the files
What is included?
1 inspected original for ABB OT90..125GFCC3: OT90-125GFCC3_STEP.STP.stp (STEP). The manufacturer describes this configuration as OT125GFCC3A, OT125GFCC3T, OT90GFCC3A, OT90GFCC3T, igs-file.
Before using it
- Match the recorded manufacturer configuration: OT125GFCC3A, OT125GFCC3T, OT90GFCC3A, OT90GFCC3T, igs-file
- The supplied model has approximate X × Y × Z bounds of 279 × 379 × 176.1 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
- The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
- The source was checked on 2026-11-11; recorded file revisions: OT90-125GFCC3_STEP.STP.stp — A. Use Documentation & sources to check for a newer issue.
File details & source
OT90-125GFCC3 STEP.STP
STEP · 403 KB · Rev A
Download filename: OT90-125GFCC3_STEP.STP.stp
Original manufacturer STEP geometry
Questions about this resource
Which original files are supplied for OT90..125GFCC3?
1 inspected original for ABB OT90..125GFCC3: OT90-125GFCC3_STEP.STP.stp (STEP). The manufacturer describes this configuration as OT125GFCC3A, OT125GFCC3T, OT90GFCC3A, OT90GFCC3T, igs-file.
Where did these ABB files come from?
ABB supplied the original files through https://search.abb.com/library/Download.aspx?DocumentID=OT90-125GFCC3_IGS.IGS&LanguageCode=en&DocumentPartId=&Action=Launch. The source reference, revision, original bytes and checksum are retained with each download.
Documentation & sources
File origin and additional details
Original publisher: ABB. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
- OT90-125GFCC3 STEP.STP
OT90-125GFCC3_STEP.STP.stp ↗ · Rev A · Acquired 2026-11-11 · ABB
- Manufacturer
- ABB
- Resource
- Product
- Formats
- STEP
- Regional source coverage
- Global
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More switchboards & switchgear · More ABB drawings · Request other equipment