Head for non illuminated push button, Harmony XB4, flush pushbutton Ø22 mm spring

Which file should I choose?

Use mcadid0005941_3d-simplified_2D-front.dxf (revision 1.0) to insert the supplied editable drawing into your layout.

Use MCADID0005941_3D-simplified.stp (revision 1.0) to place the original solid geometry in your 3D assembly.

What is included?

2 inspected originals for Schneider Electric Head for non illuminated push button, Harmony XB4, flush pushbutton Ø22 mm spring: mcadid0005941_3d-simplified_2D-front.dxf (DXF); MCADID0005941_3D-simplified.stp (STEP).

Before using it

• Match Schneider Electric Head for non illuminated push button, Harmony XB4, flush pushbutton Ø22 mm spring and the exact source filename shown above.
• The supplied model has approximate X × Y × Z bounds of 28.5 × 28.1 × 27 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
• The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
• The source was checked on 2026-11-11; recorded file revisions: mcadid0005941_3d-simplified_2D-front.dxf — 1.0; MCADID0005941_3D-simplified.stp — 1.0. Use Documentation & sources to check for a newer issue.