Which file should I choose?
Use MCADID0002875_2D-front.dxf (revision 1.0) to insert the supplied editable drawing into your layout.
Use MCADID0002875_3D-simplified.stp (revision 1.0) to place the original solid geometry in your 3D assembly.
joystick controller head Ø22 spring return
- Equipment / resource
- joystick controller head Ø22 spring return
- Manufacturer
- Schneider Electric
- Resource type
- Product
- Source-model envelope
- 29.3 × 29.8 × 84.5 mm
Downloads & Requests
About this equipment
What it does
Schneider Electric joystick controller head Ø22 spring return: original DXF / STEP for control-panel equipment layouts.
In plain English
An enclosure houses equipment and its connections. Its construction provides the environmental and access protection specified for that enclosure.
Create 2D and 3D drawings by describing what you need
- Create 2D and 3D from a description
- Edit in plain words
- Add equipment like the joystick controller head Ø22 spring return
2D drawing and 3D model · Sample project
Choosing and using the files
What is included?
2 inspected originals for Schneider Electric joystick controller head Ø22 spring return: MCADID0002875_2D-front.dxf (DXF); MCADID0002875_3D-simplified.stp (STEP).
Before using it
- Match Schneider Electric joystick controller head Ø22 spring return and the exact source filename shown above.
- The supplied model has approximate X × Y × Z bounds of 29.3 × 29.8 × 84.5 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
- The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
- The source was checked on 2026-11-11; recorded file revisions: MCADID0002875_2D-front.dxf — 1.0; MCADID0002875_3D-simplified.stp — 1.0. Use Documentation & sources to check for a newer issue.
File details & source
MCADID0002875 2D-front
DXF · 13 KB · Rev 1.0
Original filename: MCADID0002875_2D-front.dxf
Original manufacturer DXF geometry
MCADID0002875 3D-simplified
STEP · 88 KB · Rev 1.0
Original filename: MCADID0002875_3D-simplified.stp
Original manufacturer STEP geometry
Questions about this resource
Which original files are supplied for joystick controller head Ø22 spring return?
2 inspected originals for Schneider Electric joystick controller head Ø22 spring return: MCADID0002875_2D-front.dxf (DXF); MCADID0002875_3D-simplified.stp (STEP).
Where did these Schneider Electric files come from?
Schneider Electric supplied the original files through https://www.se.com/us/en/download/document/MCADID0002875_3D-CAD/. The source reference, revision, original bytes and checksum are retained with each download.
Documentation & sources
File origin and additional details
Original publisher: Schneider Electric. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
- MCADID0002875 2D-front
MCADID0002875_2D-front.dxf ↗ · Rev 1.0 · Acquired 2026-11-11 · Schneider Electric - MCADID0002875 3D-simplified
MCADID0002875_3D-simplified.stp ↗ · Rev 1.0 · Acquired 2026-11-11 · Schneider Electric
- Manufacturer
- Schneider Electric
- Resource
- Product
- Formats
- DXF / STEP
- Regional source coverage
- Global
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More automation & controls · More Schneider Electric drawings · Request other equipment