Which file should I choose?
Use xvla333_3DCAD.stp (revision 1.0) to place the original solid geometry in your 3D assembly. The ZIP contains the unmodified xvla333_3DCAD.stp.
ROUND PILOT LIGHT AND 12 IP 40 GREEN INT
- Equipment / resource
- ROUND PILOT LIGHT AND 12 IP 40 GREEN INT
- Manufacturer
- Schneider Electric
- Resource type
- Product
- Named ingress-protection rating
- IP 40
- Source-model envelope
- 14.3 × 43 × 14.1 mm
Downloads & Requests
About this equipment
What it does
Schneider Electric ROUND PILOT LIGHT AND 12 IP 40 GREEN INT: original STEP for control-panel equipment layouts.
In plain English
An enclosure houses equipment and its connections. Its construction provides the environmental and access protection specified for that enclosure.
Create 2D and 3D drawings by describing what you need
- Create 2D and 3D from a description
- Edit in plain words
- Add equipment from this library
2D drawing and 3D model · Sample project
Choosing and using the files
What is included?
1 inspected original for Schneider Electric ROUND PILOT LIGHT AND 12 IP 40 GREEN INT: xvla333_3DCAD.stp (STEP).
Before using it
- Match Schneider Electric ROUND PILOT LIGHT AND 12 IP 40 GREEN INT and the exact source filename shown above.
- The supplied model has approximate X × Y × Z bounds of 14.3 × 43 × 14.1 mm. These are source-model axes; mounting holes and installation clearances must come from the matching manufacturer sheet.
- The orthographic views are projected from the manufacturer 3D geometry. They are labelled separately from original dimensioned sheets and do not add manufacturer dimensions.
- The source was checked on 2026-11-11; recorded file revisions: xvla333_3DCAD.stp — 1.0. Use Documentation & sources to check for a newer issue.
File details & source
xvla333 3DCAD
STEP · 537 KB · Rev 1.0
Original filename: xvla333_3DCAD.stp
Original manufacturer STEP geometry
Questions about this resource
Which original files are supplied for ROUND PILOT LIGHT AND 12 IP 40 GREEN INT?
1 inspected original for Schneider Electric ROUND PILOT LIGHT AND 12 IP 40 GREEN INT: xvla333_3DCAD.stp (STEP).
Where did these Schneider Electric files come from?
Schneider Electric supplied the original files through https://www.se.com/us/en/download/document/xvla333_3DCAD/. The source reference, revision, original bytes and checksum are retained with each download.
Documentation & sources
File origin and additional details
Original publisher: Schneider Electric. Source checked 2026-11-11. Original bytes are preserved; file links and document references identify the source.
- xvla333 3DCAD
xvla333_3DCAD.stp ↗ · Rev 1.0 · Acquired 2026-11-11 · Schneider Electric
- Manufacturer
- Schneider Electric
- Resource
- Product
- Formats
- STEP
- Regional source coverage
- Global
Manufacturer source discovery; confirm the exact regional equipment configuration and certification separately.
More automation & controls · More Schneider Electric drawings · Request other equipment